meson_nfc_dma_buffer_setup() is called with the "info" buffer which is allocated a few lines before using kzalloc(). If meson_nfc_dma_buffer_setup() fails we need to free the allocated "info" buffer instead of only freeing it upon success. Fixes: 8fae856c53500a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/mtd/nand/raw/meson_nand.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index a1d8506b61c7..38db4fd61459 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -534,7 +534,7 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len) ret = meson_nfc_dma_buffer_setup(nand, buf, len, info, PER_INFO_BYTE, DMA_FROM_DEVICE); if (ret) - return ret; + goto out; cmd = NFC_CMD_N2M | (len & GENMASK(5, 0)); writel(cmd, nfc->reg_base + NFC_REG_CMD); @@ -542,6 +542,8 @@ static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len) meson_nfc_drain_cmd(nfc); meson_nfc_wait_cmd_finish(nfc, 1000); meson_nfc_dma_buffer_release(nand, len, PER_INFO_BYTE, DMA_FROM_DEVICE); + +out: kfree(info); return ret; -- 2.21.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/