On Wed, 20 Feb 2019 at 21:29, <Tudor.Ambarus@xxxxxxxxxxxxx> wrote:>> Hi, Robert,>> On 02/14/2019 10:57 PM, Robert Marko wrote:> > Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revg%2003222018%20plus.pdf> >> > Testing done on Mikrotik Routerboard RB450Gx4 board under 4.19.19 kernel.>> It is preferable to do the test on spi-nor/nextUnfortunately I cant do that as OpenWrt has a considerable amount of patches that would need to be ported and we are only moving from LTS to LTS version and we are currently on 4.19. > > > > Test board does not support Dual or Quad modes. > > > > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx> > > --- > > drivers/mtd/spi-nor/spi-nor.c | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > > index 6e13bbd1aaa5..0e958f48db1b 100644 > > --- a/drivers/mtd/spi-nor/spi-nor.c > > +++ b/drivers/mtd/spi-nor/spi-nor.c > > @@ -1975,6 +1975,11 @@ static const struct flash_info spi_nor_ids[] = { > > SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | > > SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) > > }, > > + { > > + "w25q16jv", INFO(0xef7015, 0, 64 * 1024, 32, > > + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | > > + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) > > You'll need a way to differentiate between W25Q16JV-IQ/JQ and W25Q16JV-IM/JM. Hm, from what I understood JV is the series and suffix only indictes the package. They should all have the same JEDEC ID and features. > > And I would prefer to have the new entries ordered alphabetically as much as > possible. This one should fit just before w25q20cl. Manufacturers are naming > flashes based on a product identification system. The flashes are presented in > alphabetical order, we should do the same. I agree, will reorder and send a v2. > > Cheers, > ta ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/