From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> The sam9x60 board defines the CCFG_EBICSA register under SFR, and not as a MATRIX register, as previous boards do. NAND Flash I/Os are connected to D16–D23, thus SFR_CCFG_EBICSA.NFD0_ON_D16 is set to 1. Tested using mtd-utils. - patches [1, 7] add support for the sam9x60 nand controller. I would suggest to get them through linux-mtd tree, if all agree. - patch 8 can be taken by Alexandre - patch 9 - SPDX change, can be taken by Lee - patch 10 - SPDX change, can be taken by Alexandre - patch 11 - SPDX change, should go through linux-mtd dt compatible string for "microchip,sam9x60-sfr" has already been submited at https://patchwork.kernel.org/patch/10799831/ Tudor Ambarus (11): ARM: at91: add sam9x60 SFR definitions memory: atmel-ebi: add generic name for ebi regmap dt-bindings: memory: atmel-ebi: add sam9x60 compatible memory: atmel-ebi: add sam9x60 EBI support mtd: rawnand: atmel: add generic name for EBICSA regmap dt-bindings: mtd: atmel-nand: add sam9x60 compatible mtd: rawnand: atmel: add sam9x60 nand controller support memory: atmel-ebi: move NUM_CS definition inside atmel-ebi mfd: syscon: atmel: switch to SPDX license identifiers memory: atmel-ebi: switch to SPDX license identifiers mtd: rawnand: atmel: switch to SPDX license identifiers .../bindings/memory-controllers/atmel,ebi.txt | 1 + .../devicetree/bindings/mtd/atmel-nand.txt | 1 + drivers/memory/atmel-ebi.c | 48 ++++++--- drivers/mtd/nand/raw/atmel/nand-controller.c | 117 ++++++++++++++++----- drivers/mtd/nand/raw/atmel/pmecc.c | 5 +- drivers/mtd/nand/raw/atmel/pmecc.h | 6 +- include/linux/mfd/syscon/atmel-matrix.h | 7 +- include/linux/mfd/syscon/atmel-mc.h | 6 +- include/linux/mfd/syscon/atmel-smc.h | 5 +- include/linux/mfd/syscon/atmel-st.h | 6 +- include/soc/at91/atmel-sfr.h | 34 ++++-- 11 files changed, 161 insertions(+), 75 deletions(-) -- 2.9.5 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/