Re: [PATCH v6 01/13] spi: atmel-quadspi: cache MR value to avoid a write access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 5 Feb 2019 17:33:06 +0000
<Tudor.Ambarus@xxxxxxxxxxxxx> wrote:

> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> 
> Set the controller by default in Serial Memory Mode (SMM) at probe.
> Cache Mode Register (MR) value to avoid write access when setting
> the controller in serial memory mode at exec_op().
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

Add my R-b back

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>

> ---
> v6: no change
> v5: collect R-b
> v4: s/smm/mr, init controller in serial memory mode by default
> v3: update smm value when different. rename mr/smm
> v2: cache MR value instead of moving the write access at probe
> 
>  drivers/spi/atmel-quadspi.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index ddc712410812..d6864d29f294 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -155,6 +155,7 @@ struct atmel_qspi {
>  	struct clk		*clk;
>  	struct platform_device	*pdev;
>  	u32			pending;
> +	u32			mr;
>  	struct completion	cmd_completion;
>  };
>  
> @@ -238,7 +239,14 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	icr = QSPI_ICR_INST(op->cmd.opcode);
>  	ifr = QSPI_IFR_INSTEN;
>  
> -	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +	/*
> +	 * If the QSPI controller is set in regular SPI mode, set it in
> +	 * Serial Memory Mode (SMM).
> +	 */
> +	if (aq->mr != QSPI_MR_SMM) {
> +		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +		aq->mr = QSPI_MR_SMM;
> +	}
>  
>  	mode = find_mode(op);
>  	if (mode < 0)
> @@ -381,6 +389,10 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
>  	/* Reset the QSPI controller */
>  	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
>  
> +	/* Set the QSPI controller by default in Serial Memory Mode */
> +	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +	aq->mr = QSPI_MR_SMM;
> +
>  	/* Enable the QSPI controller */
>  	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
>  


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux