[RESEND v4 09/11] mtd: cfi_cmdset_0002: Split write-to-buffer-reset sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just refactor to split the sequence from do_write_buffer().

Signed-off-by: Tokunori Ikegami <ikegami_to@xxxxxxxxxxx>
Cc: Fabio Bettoni <fbettoni@xxxxxxxxx>
Co: Hauke Mehrtens <hauke@xxxxxxxxxx>
Co: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
Cc: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Cc: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx
---
Changes since v3:
- Just change the email address of Tokunori Ikegami to ikegami_to@xxxxxxxxxxx.

Changes since v2:
- None.

Changes since v1:
- Add the patch.

 drivers/mtd/chips/cfi_cmdset_0002.c | 38 +++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 81f5e5e..d5954bf 100755
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1820,6 +1820,27 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
+static void __xipram do_write_buffer_reset(struct map_info *map,
+					   struct flchip *chip,
+					   struct cfi_private *cfi)
+{
+	/*
+	 * Recovery from write-buffer programming failures requires
+	 * the write-to-buffer-reset sequence.  Since the last part
+	 * of the sequence also works as a normal reset, we can run
+	 * the same commands regardless of why we are here.
+	 * See e.g.
+	 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+	 */
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+
+	/* FIXME - should have reset delay before continuing */
+}
 
 /*
  * FIXME: interleaved mode not tested, and probably not supported!
@@ -1922,22 +1943,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	}
 
 	if (ret) {
-		/*
-		 * Recovery from write-buffer programming failures requires
-		 * the write-to-buffer-reset sequence.  Since the last part
-		 * of the sequence also works as a normal reset, we can run
-		 * the same commands regardless of why we are here.
-		 * See e.g.
-		 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
-		 */
-		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
-				 cfi->device_type, NULL);
-		/* FIXME - should have reset delay before continuing */
-
+		do_write_buffer_reset(map, chip, cfi);
 		printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n",
 		       __func__, adr);
 	}
-- 
2.11.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux