> -----Original Message----- > From: Shawn Guo [mailto:shawnguo@xxxxxxxxxx] > Sent: Friday, February 1, 2019 8:24 AM > To: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> > Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx; bbrezillon@xxxxxxxxxx; > marek.vasut@xxxxxxxxx; broonie@xxxxxxxxxx; linux-spi@xxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; mark.rutland@xxxxxxx; robh@xxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; frieder.schrempf@xxxxxxxxxx; > computersforpeace@xxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [PATCH v8 3/5] arm64: dts: lx2160a: add FlexSPI node property > > On Tue, Jan 15, 2019 at 12:00:26PM +0000, Yogesh Narayan Gaur wrote: > > Add fspi node property for LX2160A SoC for FlexSPI driver. > > Property added for the FlexSPI controller and for the connected slave > > device for the LX2160ARDB target. > > This is having two SPI-NOR flash device, mt35xu512aba, connected at > > CS0 and CS1. > > > > Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> > > --- > > Changes for v8: > > - None > > Changes for v7: > > - None > > Changes for v6: > > - None > > Changes for v5: > > - None > > Changes for v4: > > - Incorporated Rob review comments. > > Changes for v3: > > - None. > > Changes for v2: > > - Incorporated Shawn review comments. > > > > .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 22 +++++++++++++++++++ > > .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 13 +++++++++++ > > 2 files changed, 35 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > index 6481e5f20e69..70658946fbbe 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > > @@ -50,6 +50,28 @@ > > status = "okay"; > > }; > > > > +&fspi { > > + status = "okay"; > > + > > + mt35xu512aba0: flash@0 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "spansion,m25p80"; > > + m25p,fast-read; > > + spi-max-frequency = <50000000>; > > + reg = <0>; > > + }; > > + > > + mt35xu512aba1: flash@1 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "spansion,m25p80"; > > + m25p,fast-read; > > + spi-max-frequency = <50000000>; > > + reg = <1>; > > + }; > > +}; > > + > > &i2c0 { > > status = "okay"; > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > index a79f5c1ea56d..e3ff86201f73 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > > @@ -762,5 +762,18 @@ > > <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; > > dma-coherent; > > }; > > + > > + fspi: spi@20c0000 { > > To keep the nodes sorted in unit-address, it should go after i2c@2070000. > > > + compatible = "nxp,lx2160a-fspi"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0x0 0x20c0000 0x0 0x10000>, > > + <0x0 0x20000000 0x0 0x10000000>; > > I would align the indentation with the above. > > > + reg-names = "fspi_base", "fspi_mmap"; > > + interrupts = <0 25 0x4>; /* Level high type */ > > interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; so that we can save the > comment there. > > I fixed up all these small things and applied the patch. > Ok, Thanks. -- Regards Yogesh Gaur. > Shawn > > > + clocks = <&clockgen 4 3>, <&clockgen 4 3>; > > + clock-names = "fspi_en", "fspi"; > > + status = "disabled"; > > + }; > > }; > > }; > > -- > > 2.17.1 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist > > s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm- > kernel&data=02%7C > > > 01%7Cyogeshnarayan.gaur%40nxp.com%7C6308464db1a541247dfd08d687f09 > 124%7 > > > C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636845864632818753&a > mp;sda > > > ta=urGFUKDP6ZZZOTXS1ccfLceCV2OBV5%2BiZq9foCu7ZX8%3D&reserved= > 0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/