From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> According to the datasheet of some Cypress SLC NANDs, the bad block markers can be in the first, second or last page of a block. So let's check all three locations. Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> Reviewed-by: Boris Brezillon <bbrezillon@xxxxxxxxxx> --- drivers/mtd/nand/raw/nand_amd.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/nand_amd.c b/drivers/mtd/nand/raw/nand_amd.c index 6202cbf7ee8d..2ffcddff3e27 100644 --- a/drivers/mtd/nand/raw/nand_amd.c +++ b/drivers/mtd/nand/raw/nand_amd.c @@ -40,7 +40,13 @@ static void amd_nand_decode_id(struct nand_chip *chip) static int amd_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) - chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE; + /* + * According to the datasheet of some Cypress SLC NANDs, + * the bad block markers can be in the first, second or last + * page of a block. So let's check all three locations. + */ + chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE | + NAND_BBM_LASTPAGE; return 0; } -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/