The boot ROM of the JZ4725B SoC expects a specific OOB layout on the NAND, so it makes sense to use this OOB layout unconditionally on this SoC. Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- drivers/mtd/nand/raw/jz4780_nand.c | 40 +++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c index cf24bf12884f..073b3da5c3f7 100644 --- a/drivers/mtd/nand/raw/jz4780_nand.c +++ b/drivers/mtd/nand/raw/jz4780_nand.c @@ -34,6 +34,7 @@ struct jz_soc_info { unsigned long data_offset; unsigned long addr_offset; unsigned long cmd_offset; + const struct mtd_ooblayout_ops *oob_layout; }; struct jz4780_nand_cs { @@ -208,7 +209,7 @@ static int jz4780_nand_attach_chip(struct nand_chip *chip) return -EINVAL; } - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout); return 0; } @@ -398,16 +399,53 @@ static int jz4780_nand_remove(struct platform_device *pdev) return 0; } +static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section || !ecc->total) + return -ERANGE; + + oobregion->length = ecc->total; + oobregion->offset = 3; + + return 0; +} + +static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section) + return -ERANGE; + + oobregion->length = mtd->oobsize - ecc->total - 3; + oobregion->offset = 3 + ecc->total; + + return 0; +} + +const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = { + .ecc = jz4725b_ooblayout_ecc, + .free = jz4725b_ooblayout_free, +}; + static const struct jz_soc_info jz4725b_soc_info = { .data_offset = 0x00000000, .cmd_offset = 0x00008000, .addr_offset = 0x00010000, + .oob_layout = &jz4725b_ooblayout_ops, }; static const struct jz_soc_info jz4780_soc_info = { .data_offset = 0x00000000, .cmd_offset = 0x00400000, .addr_offset = 0x00800000, + .oob_layout = &nand_ooblayout_lp_ops, }; static const struct of_device_id jz4780_nand_dt_match[] = { -- 2.11.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/