On Tue, 2019-01-15 at 07:34 +0000, Tudor.Ambarus@xxxxxxxxxxxxx wrote: > Hi, Ryder, > > On 01/14/2019 07:12 AM, Ryder Lee wrote: > > The quadspi is a generic communication interface which could be shared > > with other MediaTek SoCs. Hence rename it to a common one. > > > > Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> > > --- > > Changes since v1: rebase to v5.0-rc1. > > The patch doesn't apply on v5.0-rc1 or rc2. > > --- > > drivers/mtd/spi-nor/Kconfig | 16 ++++++++-------- > > drivers/mtd/spi-nor/Makefile | 2 +- > > 2 files changed, 9 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig > > index b433e5f..99d9d53 100644 > > --- a/drivers/mtd/spi-nor/Kconfig > > +++ b/drivers/mtd/spi-nor/Kconfig > > @@ -7,14 +7,6 @@ menuconfig MTD_SPI_NOR > > > > if MTD_SPI_NOR > > > > -config MTD_MT81xx_NOR > > - tristate "Mediatek MT81xx SPI NOR flash controller" > > - depends on HAS_IOMEM > > - help > > - This enables access to SPI NOR flash, using MT81xx SPI NOR flash > > - controller. This controller does not support generic SPI BUS, it only > > - supports SPI NOR Flash. > > - > > config MTD_SPI_NOR_USE_4K_SECTORS > > bool "Use small 4096 B erase sectors" > > default y > > @@ -68,6 +60,14 @@ config SPI_NXP_SPIFI > > Flash. Enable this option if you have a device with a SPIFI > > controller and want to access the Flash as a mtd device. > > > > +config SPI_MTK_QUADSPI > > Since you are moving the config into the file, would you mind to put your config > in an alphabetical order? > > Thanks, > ta Okay, I will send a new one to fix them. Thanks, Ryder > > + tristate "MediaTek Quad SPI controller" > > + depends on HAS_IOMEM > > + help > > + This enables support for the Quad SPI controller in master mode. > > + This controller does not support generic SPI. It only supports > > + SPI NOR. > > + > > config SPI_INTEL_SPI > > tristate > > > > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile > > index 2adedbe..189a15c 100644 > > --- a/drivers/mtd/spi-nor/Makefile > > +++ b/drivers/mtd/spi-nor/Makefile > > @@ -3,7 +3,7 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o > > obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o > > obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o > > obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o > > -obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o > > +obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o > > obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o > > obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o > > obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o > > ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/