[PATCH] mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode

[Purna Chandra Mandal <purna.chandra.mandal@xxxxxxxxx>]

cadence-quadspi controller allows upto eight bytes of data to be transferred
in software Triggered Instruction generator (STIG) mode of operation. Lower
4 bytes are written through writedatalower and upper 4 bytes by
writedataupper register.

This patch allows all the 8 bytes to be written.

Signed-off-by: Purna Chandra Mandal <purna.chandra.mandal@xxxxxxxxx>
---

 drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 04cedd3a2bf6..990934387fea 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -420,7 +420,7 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
 	unsigned int data;
 	int ret;
 
-	if (n_tx > 4 || (n_tx && !txbuf)) {
+	if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) {
 		dev_err(nor->dev,
 			"Invalid input argument, cmdlen %d txbuf 0x%p\n",
 			n_tx, txbuf);
@@ -435,8 +435,13 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
 		data = 0;
 		memcpy(&data, txbuf, n_tx);
 		writel(data, reg_base + CQSPI_REG_CMDWRITEDATALOWER);
-	}
 
+		if (n_tx > 4) {
+			data = 0;
+			memcpy(&data, txbuf + 4, n_tx - 4);
+			writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER);
+		}
+	}
 	ret = cqspi_exec_flash_cmd(cqspi, reg);
 	return ret;
 }
-- 
2.13.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/