[PATCH v4 5/7] mtd: m25p80: add support of octo mode I/O transfer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for octo mode I/O data transfer based on the controller (spi)
mode.
Assign hw-capability mask bits for octo transfer.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
---
Changes for v4:
- None
Changes for v3:
- Modified string 'octal' with 'octo'.
Changes for v2:
- Incorporated review comments of Boris.

 drivers/mtd/devices/m25p80.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4a1d04..6f3c280 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -195,7 +195,14 @@ static int m25p_probe(struct spi_mem *spimem)
 	spi_mem_set_drvdata(spimem, flash);
 	flash->spimem = spimem;
 
-	if (spi->mode & SPI_RX_QUAD) {
+	if (spi->mode & SPI_RX_OCTO) {
+		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+
+		if (spi->mode & SPI_TX_OCTO)
+			hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
+					SNOR_HWCAPS_PP_1_1_8 |
+					SNOR_HWCAPS_PP_1_8_8);
+	} else if (spi->mode & SPI_RX_QUAD) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
 
 		if (spi->mode & SPI_TX_QUAD)
-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux