On Fri, 2018-11-16 at 14:25:49 UTC, thor.thayer@xxxxxxxxxxxxxxx wrote: > From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx> > > The current Cadence QSPI driver caused a kernel panic sporadically > when writing to QSPI. The problem was caused by writing more bytes > than needed because the QSPI operated on 4 bytes at a time. > <snip> > [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 > [ 11.209254] pgd = e463054d > [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 > [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM > [ 11.222797] Modules linked in: > [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f > [ 11.235796] Hardware name: Altera SOCFPGA Arria10 > [ 11.240487] PC is at __raw_writesl+0x70/0xd4 > [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc > </snip> > On a page boundary limit the number of bytes copied from the tx buffer > to remain within the page. > > This patch uses a temporary buffer to hold the 4 bytes to write and then > copies only the bytes required from the tx buffer. > > Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@xxxxxxxxx> > Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx> Applied to http://git.infradead.org/linux-mtd.git master, thanks. Boris ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/