From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> --- arch/arm/mach-davinci/board-dm646x-evm.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8d5be6dd2019..02b57face113 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -22,7 +22,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/ti-aemif.h> @@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; #endif @@ -440,7 +437,7 @@ static void evm_init_cpld(void) static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("pcf8574a", 0x38), -- 2.19.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/