Drop the asm and mach headers inclusion and allow this driver to be compiled when COMPILE_TEST=y in order to increase compile-test coverage. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> Tested-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx> --- Changes in v3: - Add Janusz T-b - Include linux/sizes.h and linux/io.h Changes in v2: - New patch --- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/mtd/nand/raw/ams-delta.c | 7 ++----- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index c7efc31384d5..1a55d3e3d4c5 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -70,7 +70,7 @@ config MTD_NAND_GPIO config MTD_NAND_AMS_DELTA tristate "NAND Flash device on Amstrad E3" - depends on MACH_AMS_DELTA + depends on MACH_AMS_DELTA || COMPILE_TEST default y help Support for NAND flash on Amstrad E3 (Delta). diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c index 9ca70aab199d..a7c0e3af3b11 100644 --- a/drivers/mtd/nand/raw/ams-delta.c +++ b/drivers/mtd/nand/raw/ams-delta.c @@ -21,15 +21,12 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/platform_data/gpio-omap.h> - -#include <asm/io.h> -#include <asm/sizes.h> - -#include <mach/hardware.h> +#include <linux/sizes.h> /* * MTD structure for E3 (Delta) -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/