Re: Regression in handling power cuts since 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up")

[Rafał Miłecki <zajec5@xxxxxxxxx>]

[resending without HTML attachment]
[see http://files.zajec.net/openwrt/ubifs-dbg.html instead]

On Mon, 22 Oct 2018 at 10:26, Richard Weinberger <richard@xxxxxx> wrote:
> Am Montag, 22. Oktober 2018, 09:14:08 CEST schrieb Rafał Miłecki:
> > On Fri, 19 Oct 2018 at 14:31, Rafał Miłecki <zajec5@xxxxxxxxx> wrote:
> > > Since OpenWrt switch from kernel 4.9 to 4.14 users started randomly
> > > reporting file system corruptions. OpenWrt uses overlay(fs) with
> > > squashfs as lowerdir and ubifs as upperdir. Russell managed to isolate
> > > & describe test case for reproducing corruption when doing a power cut
> > > after first boot.
> > >
> > > (...)
> > >
> > > Can I ask you to check if there is something possibly wrong with the
> > > above ovl commit? Or does it expose some problem with the ubifs? Or
> > > maybe the whole UBI?
> > >
> > > FWIW testing above commit (and one before it) always results in single
> > > error in the kernel log:
> > > [   14.250184] UBIFS error (ubi0:1 pid 637): ubifs_add_orphan: orphaned twice
> > >
> > > That UBIFS error doesn't occur with 4.12.14. Unfortunately it's
> > > impossible to cleanly revert 3a1e819b4e80 from the top of 4.12.14.
> >
> > Let me provide a summary of all relevant commits & tests:
> >
> > By "Corruption" I mean file system corruption after power cut
>
> Well, is the filesystem not consistent anymore?
> From what Russel explained to me, I thought the main problem is that no write back happens.
> IOW the inode is present, has correct length, but no content is there (all zeros).

I probably misused "corruption" word. What I meant by "corruption" was
file having all "00"es instead of expected data.


> Just like the typical case where userspace does not fsync.
> But in your case sooner or later write back should have happened because the writeback timer
> fires at some point.

As you probably noticed I wrote tmptest.c - could you test it, please?
See if you can reproduce the problem? Please call it with 3 arguments:
1) Path on ubifs mount point
2) Some xattr name
3) Some xattr value

Please note I wait 5 seconds (this matches
vm.dirty_writeback_centisecs being 500) before doing a power cut. That
lets ubifs write to flash. For some reason files that got fsetxattr
called for them still are all "00"es after a power cut.

I did some extra testing after enabling ubifs debugging for io.c,
file.c and journal.c. Debugging output looks like expected. I can
clearly see wbuf_timer_callback_nolock() being called.
I attached my debugging summary as ubifs-dbg.html please take a look
at it in case I missed something.

-- 
Rafał

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/