RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi,

> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@xxxxxxxxxxx]
> Sent: Monday, October 22, 2018 3:41 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
> Cc: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>; richard@xxxxxx; Mark
> Brown <broonie@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx;
> nicolas.ferre@xxxxxxxxxxxxx; marek.vasut@xxxxxxxxx;
> cyrille.pitchen@xxxxxxxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> Cristian.Birsan@xxxxxxxxxxxxx; Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>;
> computersforpeace@xxxxxxxxx; dwmw2@xxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
> NOR flash memories
> 
> On Mon, 22 Oct 2018 10:03:55 +0000
> Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> wrote:
> 
> > Hi,
> >
> >
> > > -----Original Message-----
> > > From: Boris Brezillon [mailto:boris.brezillon@xxxxxxxxxxx]
> > > Sent: Monday, October 22, 2018 2:46 PM
> > > To: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
> > > Cc: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>; richard@xxxxxx;
> > > Mark Brown <broonie@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx;
> > > nicolas.ferre@xxxxxxxxxxxxx; marek.vasut@xxxxxxxxx;
> > > cyrille.pitchen@xxxxxxxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx;
> > > Cristian.Birsan@xxxxxxxxxxxxx; Cyrille Pitchen
> > > <cyrille.pitchen@xxxxxxxxxx>; computersforpeace@xxxxxxxxx;
> > > dwmw2@xxxxxxxxxxxxx; linux-arm- kernel@xxxxxxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform
> > > SFDP SPI NOR flash memories
> > >
> > > On Mon, 22 Oct 2018 06:04:13 +0000
> > > Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx> wrote:
> > >
> > >
> > With below patch, it gets stuck in for loop of "+       for (nmaps = 0; i< smpt_len;
> nmaps++) {".
> >
> > [    1.624684] m25p80 spi0.0: found s25fl512s, expected m25p80
> > [    1.630377] Start [addr_width:00000000, read_dumy:08,
> read_opcode:00000000]
> > [    1.637335] spi_nor_get_map_in_use:2882 smpt[0]=08ff65fc
> > [    1.642641] spi_nor_get_map_in_use:2882 smpt[1]=00000004
> > [    1.647945] spi_nor_get_map_in_use:2882 smpt[2]=04ff65fc
> > [    1.653248] spi_nor_get_map_in_use:2882 smpt[3]=00000002
> > [    1.658551] spi_nor_get_map_in_use:2882 smpt[4]=02ff65fd
> > [    1.663855] spi_nor_get_map_in_use:2882 smpt[5]=00000004
> > [    1.669158] spi_nor_get_map_in_use:2882 smpt[6]=ff0201fe
> > [    1.674461] spi_nor_get_map_in_use:2882 smpt[7]=00007ff1
> > [    1.679766] spi_nor_get_map_in_use:2882 smpt[8]=00037ff4
> > [    1.685070] spi_nor_get_map_in_use:2882 smpt[9]=03fbfff4
> > [    1.690375] spi_nor_get_map_in_use:2882 smpt[10]=ff0203fe
> > [    1.695768] spi_nor_get_map_in_use:2882 smpt[11]=03fbfff4
> > [    1.701158] spi_nor_get_map_in_use:2882 smpt[12]=00037ff4
> > [    1.706550] spi_nor_get_map_in_use:2882 smpt[13]=00007ff1
> > [    1.711940] spi_nor_get_map_in_use:2882 smpt[14]=ff0005ff
> > [    1.717330] spi_nor_get_map_in_use:2882 smpt[15]=03fffff4
> > [    1.722720] smpt[0]=[addr_width:00000000, read_dumy:08,
> read_opcode:00000065]
> > [    1.729861] spi_nor_get_map_in_use:2912 map_id=1
> >
> >
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -2863,26 +2863,36 @@ static u8 spi_nor_smpt_read_dummy(const struct
> spi_nor *nor, const u32 settings)
> >   * @nor:       pointer to a 'struct spi_nor'
> >   * @smpt:      pointer to the sector map parameter table
> >   */
> > -static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const
> > u32 *smpt)
> > +static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const
> > +u32 *smpt, u32 smpt_len)
> >  {
> >         const u32 *ret = NULL;
> > -       u32 i, addr;
> > +       u32 i, addr, nmaps;
> >         int err;
> >         u8 addr_width, read_opcode, read_dummy;
> >         u8 read_data_mask, data_byte, map_id;
> > +       bool map_id_is_valid = false;
> >
> >         addr_width = nor->addr_width;
> >         read_dummy = nor->read_dummy;
> >         read_opcode = nor->read_opcode;
> >
> > +       pr_info("Start [addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> > +
> > +       for (i = 0; i<smpt_len; i++)
> > +               pr_info("%s:%i smpt[%d]=%08x\n", __func__, __LINE__,
> > + i, smpt[i]);
> > +
> >         map_id = 0;
> > -       i = 0;
> >         /* Determine if there are any optional Detection Command Descriptors */
> > -       while (!(smpt[i] & SMPT_DESC_TYPE_MAP)) {
> > +       for (i = 0; i< smpt_len; i++) {
> > +               if ((smpt[i] & SMPT_DESC_TYPE_MAP))
> > +                       break;
> > +
> >                 read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
> >                 nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
> >                 nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
> >                 nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
> > +               pr_info("smpt[%d]=[addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", i, nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> > +
> >                 addr = smpt[i + 1];
> >
> >                 err = spi_nor_read_raw(nor, addr, 1, &data_byte); @@
> > -2894,18 +2904,36 @@ static const u32 *spi_nor_get_map_in_use(struct
> spi_nor *nor, const u32 *smpt)
> >                  * Configuration that is currently in use.
> >                  */
> >                 map_id = map_id << 1 | !!(data_byte & read_data_mask);
> > +               map_id_is_valid = true;
> >                 i = i + 2;
> >         }
> >
> > -       /* Find the matching configuration map */
> > -       while (SMPT_MAP_ID(smpt[i]) != map_id) {
> > -               if (smpt[i] & SMPT_DESC_END)
> > -                       goto out;
> > +       if (map_id_is_valid)
> > +               pr_info("%s:%i map_id=%d\n", __func__, __LINE__, map_id);
> > +       else
> > +               pr_info("%s:%i NO map_id\n", __func__, __LINE__);
> > +
> > +       for (nmaps = 0; i< smpt_len; nmaps++) {
> > +               if((smpt[i] & SMPT_DESC_TYPE_MAP))
> > +                       continue;
> 
> Try to Replace the above if block by:
> 
> 		if (!(smpt[i] & SMPT_DESC_TYPE_MAP)) {
> 			i += 2;
> 			continue;
> 		}
> 

It works,
[    1.628162] m25p80 spi0.0: found s25fl512s, expected m25p80                                                                   
[    1.633854] Start [addr_width:00000000, read_dumy:08, read_opcode:00000000]                                                   
[    1.640811] spi_nor_get_map_in_use:2882 smpt[0]=08ff65fc                                                                      
[    1.646117] spi_nor_get_map_in_use:2882 smpt[1]=00000004                                                                      
[    1.651421] spi_nor_get_map_in_use:2882 smpt[2]=04ff65fc                                                                      
[    1.656724] spi_nor_get_map_in_use:2882 smpt[3]=00000002                                                                      
[    1.662028] spi_nor_get_map_in_use:2882 smpt[4]=02ff65fd                                                                      
[    1.667331] spi_nor_get_map_in_use:2882 smpt[5]=00000004                                                                      
[    1.672635] spi_nor_get_map_in_use:2882 smpt[6]=ff0201fe                                                                      
[    1.677937] spi_nor_get_map_in_use:2882 smpt[7]=00007ff1                                                                      
[    1.683240] spi_nor_get_map_in_use:2882 smpt[8]=00037ff4                                                                      
[    1.688542] spi_nor_get_map_in_use:2882 smpt[9]=03fbfff4                                                                      
[    1.693845] spi_nor_get_map_in_use:2882 smpt[10]=ff0203fe                                                                     
[    1.699234] spi_nor_get_map_in_use:2882 smpt[11]=03fbfff4                                                                     
[    1.704625] spi_nor_get_map_in_use:2882 smpt[12]=00037ff4                                                                     
[    1.710014] spi_nor_get_map_in_use:2882 smpt[13]=00007ff1                                                                     
[    1.715403] spi_nor_get_map_in_use:2882 smpt[14]=ff0005ff                                                                     
[    1.720791] spi_nor_get_map_in_use:2882 smpt[15]=03fffff4                                                                     
[    1.726180] smpt[0]=[addr_width:00000000, read_dumy:08, read_opcode:00000065]                                                 
[    1.733320] spi_nor_get_map_in_use:2912 map_id=0 smpt_len:16 i=:3                                                             
[    1.739406] End [addr_width:00000000, read_dumy:08, read_opcode:00000065]                                                     
[    1.746204] m25p80 spi0.0: s25fl512s (65536 Kbytes)                        

-       /* Find the matching configuration map */
-       while (SMPT_MAP_ID(smpt[i]) != map_id) {
-               if (smpt[i] & SMPT_DESC_END)
-                       goto out;
+       if (map_id_is_valid)
+               pr_info("%s:%i map_id=%d smpt_len:%d i=:%d\n", __func__, __LINE__, map_id, smpt_len, i);
+       else
+               pr_info("%s:%i NO map_id\n", __func__, __LINE__);
+
+       for (nmaps = 0; i< smpt_len; nmaps++) {
+               if(!(smpt[i] & SMPT_DESC_TYPE_MAP)) {
+                       i += 2;
+                       continue;
+               }
+
+               if(!map_id_is_valid) {
+                       if (nmaps) {
+                               ret = NULL;
+                               break;
+                       }
+
+                       ret = smpt+i;
+               } else if (map_id == SMPT_MAP_ID(smpt[i])) {
+                       ret = smpt+i;
+                       break;
+               }
+
                /* increment the table index to the next map */
                i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
        }

-       ret = smpt + i;
+       pr_info("End [addr_width:%08x, read_dumy:%0x8, read_opcode:%08x]\n", nor->addr_width, nor->read_dummy, nor->read_opcode);

> > +
> > +               if(!map_id_is_valid) {
> > +                       if (nmaps) {
> > +                               ret = NULL;
> > +                               break;
> > +                       }
> > +
> > +                       ret = smpt+i;
> > +               } else if (map_id == SMPT_MAP_ID(smpt[i])) {
> > +                       ret = smpt+i;
> > +                       break;
> > +               }
> > +
> >                 /* increment the table index to the next map */
> >                 i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
> >         }
> >
> > -       ret = smpt + i;
> > +       pr_info("End [addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> >         /* fall through */
> >  out:
> >         nor->addr_width = addr_width;


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux