Now MTD emulated by UBI volumn doesn't allocate wbuf_verify in jffs2_ubivol_setup(), because UBI can do the verifcation itself, so when CONFIG_JFFS2_FS_WBUF_VERIFY is enabled and a MTD device emulated by UBI volumn is used, a Oops will occur as show in the following trace: general protection fault: 0000 [#1] SMP KASAN PTI CPU: 6 PID: 404 Comm: kworker/6:1 Not tainted 4.19.0-rc8 Workqueue: events_long delayed_wbuf_sync RIP: 0010:ubi_io_read+0x156/0x650 Call Trace: ubi_eba_read_leb+0x57d/0xba0 ubi_leb_read+0xe5/0x1b0 gluebi_read+0x10c/0x1a0 mtd_read+0x112/0x340 jffs2_verify_write+0xef/0x440 __jffs2_flush_wbuf+0x3fa/0x3540 jffs2_flush_wbuf_gc+0x1b1/0x2e0 process_one_work+0x58b/0x11e0 worker_thread+0x8f/0xfe0 kthread+0x2ae/0x3a0 ret_from_fork+0x35/0x40 Fix the problem by checking the validity of wbuf_verify before using it in jffs2_verify_write(). Cc: stable@xxxxxxxxxxxxxxx Fixes: 0029da3bf430 ("JFFS2: add UBI support") Signed-off-by: Hou Tao <houtao1@xxxxxxxxxx> --- fs/jffs2/wbuf.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index c6821a509481..3de45f4559d1 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -234,6 +234,13 @@ static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf, size_t retlen; char *eccstr; + /* + * MTD emulated by UBI volume doesn't allocate wbuf_verify, + * because it can do the verification itself. + */ + if (!c->wbuf_verify) + return 0; + ret = mtd_read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify); if (ret && ret != -EUCLEAN && ret != -EBADMSG) { pr_warn("%s(): Read back of page at %08x failed: %d\n", -- 2.16.2.dirty ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/