Re: [RESEND PATCH 1/2] mtd: spi-nor: add macros related to MICRON flash

[Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>]

Hi,

On 09/19/2018 07:50 AM, Yogesh Gaur wrote:
> Some MICRON related macros in spi-nor domain were ST.
> Rename entries related to STMicroelectronics under macro SNOR_MFR_ST.
> 
> Added entry of MFR Id for Micron flashes, 0x002C.
> 
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 9 ++++++---
>  include/linux/mtd/cfi.h       | 1 +
>  include/linux/mtd/spi-nor.h   | 3 ++-
>  3 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index f028277..33a55bc 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -271,6 +271,7 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
>  	u8 cmd;
>  
>  	switch (JEDEC_MFR(info)) {
> +	case SNOR_MFR_ST:

We should mark switch cases where we are expecting to fall through, so that we
will be prepared when enabling -Wimplicit-fallthrough.

>  	case SNOR_MFR_MICRON:
>  		/* Some Micron need WREN command; all will accept it */
>  		need_wren = true;
> @@ -1096,7 +1097,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
>  
> -	/* Micron */
> +	/* Micron <--> ST Micro */
>  	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32, SECT_4K | SPI_NOR_QUAD_READ) },
>  	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
>  	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
> @@ -2502,6 +2503,7 @@ static int spi_nor_init_params(struct spi_nor *nor,
>  			params->quad_enable = macronix_quad_enable;
>  			break;
>  
> +		case SNOR_MFR_ST:
>  		case SNOR_MFR_MICRON:
>  			break;
>  
> @@ -2876,8 +2878,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	mtd->_resume = spi_nor_resume;
>  
>  	/* NOR protection support for STmicro/Micron chips and similar */
> -	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
> -			info->flags & SPI_NOR_HAS_LOCK) {
> +	if (JEDEC_MFR(info) == SNOR_MFR_ST ||
> +	    JEDEC_MFR(info) == SNOR_MFR_MICRON ||
> +	    info->flags & SPI_NOR_HAS_LOCK) {
>  		nor->flash_lock = stm_lock;
>  		nor->flash_unlock = stm_unlock;
>  		nor->flash_is_locked = stm_is_locked;
> diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
> index 9b57a9b..cbf7716 100644
> --- a/include/linux/mtd/cfi.h
> +++ b/include/linux/mtd/cfi.h
> @@ -377,6 +377,7 @@ struct cfi_fixup {
>  #define CFI_MFR_SHARP		0x00B0
>  #define CFI_MFR_SST		0x00BF
>  #define CFI_MFR_ST		0x0020 /* STMicroelectronics */
> +#define CFI_MFR_MICRON		0x002C /* Micron */

Can you point us to a datasheet to verify the id?

Best,
ta

>  #define CFI_MFR_TOSHIBA		0x0098
>  #define CFI_MFR_WINBOND		0x00DA
>  
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index c922e97..f43bfc5 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -23,7 +23,8 @@
>  #define SNOR_MFR_ATMEL		CFI_MFR_ATMEL
>  #define SNOR_MFR_GIGADEVICE	0xc8
>  #define SNOR_MFR_INTEL		CFI_MFR_INTEL
> -#define SNOR_MFR_MICRON		CFI_MFR_ST /* ST Micro <--> Micron */
> +#define SNOR_MFR_ST		CFI_MFR_ST	/* ST Micro */
> +#define SNOR_MFR_MICRON		CFI_MFR_MICRON	/* Micron */
>  #define SNOR_MFR_MACRONIX	CFI_MFR_MACRONIX
>  #define SNOR_MFR_SPANSION	CFI_MFR_AMD
>  #define SNOR_MFR_SST		CFI_MFR_SST
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/