Apparently ECC bytes are not ordered as expected by nand_correct_data() in the ecc_calc buffer which leads to invalid bitflip correction when an ECC error is detected (can be reproduced with 'nandbiterrs -i'). Re-ordering ECC bytes seems to fix the problem. While at it, get rid of the useless u8 cast. Fixes: 6c009ab89a21 ("mtd: generic FSMC NAND MTD driver") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> --- drivers/mtd/nand/raw/fsmc_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index f418236fa020..c79f8e965b38 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -440,9 +440,9 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, uint32_t ecc_tmp; ecc_tmp = readl_relaxed(host->regs_va + ECC1); - ecc[0] = (uint8_t) (ecc_tmp >> 0); - ecc[1] = (uint8_t) (ecc_tmp >> 8); - ecc[2] = (uint8_t) (ecc_tmp >> 16); + ecc[0] = ecc_tmp >> 8; + ecc[1] = ecc_tmp; + ecc[2] = ecc_tmp >> 16; return 0; } -- 2.14.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/