Re: [PATCH v2 06/29] mtd: Add support for reading MTD devices via the nvmem API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 21 Aug 2018 00:53:27 +0200
Alban <albeu@xxxxxxx> wrote:

> On Sun, 19 Aug 2018 18:46:09 +0200
> Boris Brezillon <boris.brezillon@xxxxxxxxxxx> wrote:
> 
> > On Sun, 19 Aug 2018 13:31:06 +0200
> > Alban <albeu@xxxxxxx> wrote:
> >   
> > > On Fri, 17 Aug 2018 18:27:20 +0200
> > > Boris Brezillon <boris.brezillon@xxxxxxxxxxx> wrote:
> > >     
> > > > Hi Bartosz,
> > > > 
> > > > On Fri, 10 Aug 2018 10:05:03 +0200
> > > > Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
> > > >       
> > > > > From: Alban Bedel <albeu@xxxxxxx>
> > > > > 
> > > > > Allow drivers that use the nvmem API to read data stored on MTD devices.
> > > > > For this the mtd devices are registered as read-only NVMEM providers.
> > > > > 
> > > > > Signed-off-by: Alban Bedel <albeu@xxxxxxx>
> > > > > [Bartosz:
> > > > >   - use the managed variant of nvmem_register(),
> > > > >   - set the nvmem name]
> > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>        
> > > > 
> > > > What happened to the 2 other patches of Alban's series? I'd really
> > > > like the DT case to be handled/agreed on in the same patchset, but
> > > > IIRC, Alban and Srinivas disagreed on how this should be represented.
> > > > I hope this time we'll come to an agreement, because the MTD <-> NVMEM
> > > > glue has been floating around for quite some time...      
> > > 
> > > These other patches were to fix what I consider a fundamental flaw in
> > > the generic NVMEM bindings, however we couldn't agree on this point.
> > > Bartosz later contacted me to take over this series and I suggested to
> > > just change the MTD NVMEM binding to use a compatible string on the
> > > NVMEM cells as an alternative solution to fix the clash with the old
> > > style MTD partition.
> > > 
> > > However all this has no impact on the code needed to add NVMEM support
> > > to MTD, so the above patch didn't change at all.    
> > 
> > It does have an impact on the supported binding though.
> > nvmem->dev.of_node is automatically assigned to mtd->dev.of_node, which
> > means people will be able to define their NVMEM cells directly under
> > the MTD device and reference them from other nodes (even if it's not
> > documented), and as you said, it conflict with the old MTD partition
> > bindings. So we'd better agree on this binding before merging this
> > patch.  
> 
> Unless the nvmem cell node has a compatible string, then it won't be
> considered as a partition by the MTD code. That is were the clash is,
> both bindings allow free named child nodes without a compatible string.

Except the current nvmem cells parsing code does not enforce that, and
existing DTs rely on this behavior, so we're screwed. Or are you
suggesting to add a new "bool check_cells_compat;" field to
nvmem_config?

> 
> > I see several options:
> > 
> > 1/ provide a way to tell the NVMEM framework not to use parent->of_node
> >    even if it's != NULL. This way we really don't support defining
> >    NVMEM cells in the DT, and also don't support referencing the nvmem
> >    device using a phandle.  
> 
> I really don't get what the point of this would be. Make the whole API
> useless?

No, just allow Bartosz to get his changes merged without waiting for you
and Srinivas to agree on how to handle the new binding. As I said
earlier, this mtd <-> nvmem stuff has been around for quite some time,
and instead of trying to find an approach that makes everyone happy, you
decided to let the patchset die.

> 
> > 2/ define a new binding where all nvmem-cells are placed in an
> >    "nvmem" subnode (just like we have this "partitions" subnode for
> >    partitions), and then add a config->of_node field so that the
> >    nvmem provider can explicitly specify the DT node representing the
> >    nvmem device. We'll also need to set this field to ERR_PTR(-ENOENT)
> >    in case this node does not exist so that the nvmem framework knows
> >    that it should not assign nvmem->dev.of_node to parent->of_node  
> 
> This is not good. First the NVMEM device is only a virtual concept of
> the Linux kernel, it has no place in the DT.

nvmem-cells is a virtual concept too, still, you define them in the DT.

> Secondly the NVMEM
> provider (here the MTD device) then has to manually parse its DT node to
> find this subnode, pass it to the NVMEM framework to later again
> resolve it back to the MTD device.

We don't resolve it back to the MTD device, because the MTD device is
just the parent of the nvmem device.

> Not very complex but still a lot of
> useless code, just registering the MTD device is a lot simpler and much
> more inline with most other kernel API that register a "service"
> available from a device.

I'm not a big fan of this option either, but I thought I had to propose
it.

> 
> > 3/ only declare partitions as nvmem providers. This would solve the
> >    problem we have with partitions defined in the DT since
> >    defining sub-partitions in the DT is not (yet?) supported and
> >    partition nodes are supposed to be leaf nodes. Still, I'm not a big
> >    fan of this solution because it will prevent us from supporting
> >    sub-partitions if we ever want/need to.  
> 
> That sound like a poor workaround.

Yes, that's a workaround. And the reason I propose it, is, again,
because I don't want to block Bartosz.

> Remember that this problem could
> appear with any device that has a binding that use child nodes.

I'm talking about partitions, and you're talking about mtd devices.
Right now partitions don't have subnodes, and if we define that
partition subnodes should describe nvmem-cells, then it becomes part of
the official binding. So, no, the problem you mention does not (yet)
exist.

> 
> > 4/ Add a ->of_xlate() hook that would be called if present by the
> >    framework instead of using the default parsing we have right now.  
> 
> That is a bit cleaner, but I don't think it would be worse the
> complexity.

But it's way more flexible than putting everything in the nvmem
framework. BTW, did you notice that nvmem-cells parsing does not work
with flashes bigger than 4GB, because the framework assumes
#address-cells and #size-cells are always 1. That's probably something
we'll have to fix for the MTD case.

> Furthermore xlate functions are more about converting
> from hardware parameters to internal kernel representation than to hide
> extra DT parsing.

Hm, how is that different? ->of_xlate() is just a way for drivers to
have their own DT representation, which is exactly what we want here.

> 
> > 5/ Tell the nvmem framework the name of the subnode containing nvmem
> >    cell definitions (if NULL that means cells are directly defined
> >    under the nvmem provider node). We would set it to "nvmem-cells" (or
> >    whatever you like) for the MTD case.  
> 
> If so please match on compatible and not on the node name.

If you like.

> 
> 6/ Extend the current NVMEM cell lookup to check if the parent node of
> the cell has a compatible string set to "nvmem-cells". If it doesn't it
> mean we have the current binding and this node is the NVMEM device. If
> it does the device node is just the next parent. This is trivial to
> implement (literally 2 lines of code) and cover all the cases currently
> known.

Except Srinivas was not happy with this solution, and this stalled the
discussion. I'm trying to find other options and you keep rejecting all
of them to come back to this one.

> 
> 7/ Just add a compatible string to the nvmem cell. No code change is
> needed,

That's not true!!! What forces people to add this compatible in their
DT? Nothing. I'll tell you what will happen: people will start defining
their nvmem cells directly under the MTD node because that *works*, and
even if the binding is not documented and we consider it invalid, we'll
be stuck supporting it forever. As said above, the very reason for
option #1 to exist is to give you and Srinivas some more time to sort
this out, while unblocking Bartosz in the meantime.

> however as the nvmem cells have an address space (the offset in
> byte in the storage) it might still clash with another address space
> used by the main device biding (for example a number of child
> functions).
> 
> > There are probably other options (some were proposed by Alban and
> > Srinivas already), but I'd like to get this sorted out before we merge
> > this patch.
> > 
> > Alban, Srinivas, any opinion?  
> 
> My preference goes to 6/ as it is trivial to implement, solves all
> known shortcomings and is backward compatible with the current binding.
> All other solutions have limitations and/or require too complex
> implementations compared to what they try to solve.

So we're back to square 1, and you're again blocking everything because
you refuse to consider other options.

There's obviously nothing more I can do to help, and that's unfortunate
because other people are waiting for this feature.

Regards,

Boris

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux