The SRAM initialization might fail. If that happens further NAND operations won't be successful. Therefore, the chip init routine should fail if the SRAM initialization didn't work. Signed-off-by: Kurt Kanzenbach <kurt@xxxxxxxxxxxxx> --- Changes since v1: - Subject drivers/mtd/nand/raw/fsl_ifc_nand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 24f59d0066af..e4f5792dc589 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -761,7 +761,7 @@ static const struct nand_controller_ops fsl_ifc_controller_ops = { .attach_chip = fsl_ifc_attach_chip, }; -static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) +static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) { struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs; @@ -805,12 +805,16 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat, msecs_to_jiffies(IFC_TIMEOUT_MSECS)); - if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) + if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) { pr_err("fsl-ifc: Failed to Initialise SRAM\n"); + return -ETIMEDOUT; + } /* Restore CSOR and CSOR_ext */ ifc_out32(csor, &ifc_global->csor_cs[cs].csor); ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext); + + return 0; } static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) @@ -914,8 +918,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.algo = NAND_ECC_HAMMING; } - if (ctrl->version >= FSL_IFC_VERSION_1_1_0) - fsl_ifc_sram_init(priv); + if (ctrl->version >= FSL_IFC_VERSION_1_1_0) { + int ret; + + ret = fsl_ifc_sram_init(priv); + if (ret) + return ret; + } /* * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older -- 2.11.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/