On Wed, 25 Jul 2018 15:31:38 +0200 Miquel Raynal <miquel.raynal at bootlin.com> wrote: > Two helpers have been added to the core to do all kind of controller > side configuration/initialization between the detection phase and the > final NAND scan. Implement these hooks so that we can convert the driver > to just use nand_scan() instead of the nand_scan_ident() + > nand_scan_tail() pair. > > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> > --- > drivers/mtd/nand/raw/lpc32xx_mlc.c | 61 +++++++++++++++++++++----------------- > 1 file changed, 33 insertions(+), 28 deletions(-) > > diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c > index 052d123a8304..e82abada130a 100644 > --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c > +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c > @@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = { > }; > > struct lpc32xx_nand_host { > + struct platform_device *pdev; You don't need pdev. With this field removed Reviewed-by: Boris Brezillon <boris.brezillon at bootlin.com> > struct nand_chip nand_chip; > struct lpc32xx_mlc_platform_data *pdata; > struct clk *clk; > @@ -653,6 +654,32 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev) > return ncfg; > } > > +static int lpc32xx_nand_attach_chip(struct nand_chip *chip) > +{ > + struct mtd_info *mtd = nand_to_mtd(chip); > + struct lpc32xx_nand_host *host = nand_get_controller_data(chip); > + struct device *dev = &host->pdev->dev; > + > + host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); > + if (!host->dma_buf) > + return -ENOMEM; > + > + host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); > + if (!host->dummy_buf) > + return -ENOMEM; > + > + chip->ecc.mode = NAND_ECC_HW; > + chip->ecc.size = 512; > + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); > + host->mlcsubpages = mtd->writesize / 512; > + > + return 0; > +} > + > +static const struct nand_controller_ops lpc32xx_nand_controller_ops = { > + .attach_chip = lpc32xx_nand_attach_chip, > +}; > + > /* > * Probe for NAND controller > */ > @@ -669,6 +696,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > if (!host) > return -ENOMEM; > > + host->pdev = pdev; > + > rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); > host->io_base = devm_ioremap_resource(&pdev->dev, rc); > if (IS_ERR(host->io_base)) > @@ -748,31 +777,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > } > } > > - /* > - * Scan to find existance of the device and > - * Get the type of NAND device SMALL block or LARGE block > - */ > - res = nand_scan_ident(mtd, 1, NULL); > - if (res) > - goto release_dma_chan; > - > - host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); > - if (!host->dma_buf) { > - res = -ENOMEM; > - goto release_dma_chan; > - } > - > - host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); > - if (!host->dummy_buf) { > - res = -ENOMEM; > - goto release_dma_chan; > - } > - > - nand_chip->ecc.mode = NAND_ECC_HW; > - nand_chip->ecc.size = 512; > - mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); > - host->mlcsubpages = mtd->writesize / 512; > - > /* initially clear interrupt status */ > readb(MLC_IRQ_SR(host->io_base)); > > @@ -794,10 +798,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > } > > /* > - * Fills out all the uninitialized function pointers with the defaults > - * And scans for a bad block table if appropriate. > + * Scan to find existence of the device and get the type of NAND device: > + * SMALL block or LARGE block. > */ > - res = nand_scan_tail(mtd); > + nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops; > + res = nand_scan(mtd, 1); > if (res) > goto free_irq; >