[PATCH] mtd: nand: add Winbond manufacturer and chip

[boris.brezillon@xxxxxxxxxxx (Boris Brezillon)]

Hi John,

On Tue, 24 Jul 2018 16:09:14 +0200
John Crispin <john at phrozen.org> wrote:

> From: Christian Lamparter <chunkeey at gmail.com>
> 
> This patch adds the W25N01GV NAND to the table of
> known devices. Without this patch the device gets detected:
> 
> nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
> nand: Unknown NAND 256MiB 1,8V 8-bit
> nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16

Nice try! You're trying to add support for a SPI NAND in a subsystem
that is supposed to only deal with parallel/raw NANDs :-). I guess
you're using the MT29F driver that lies in staging (or a modified
version of this driver).

> 
> Whereas the u-boot identifies it as:
> spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
> SF: Detected W25N01GV with page size 2 KiB, total 128 MiB

I'm also surprised you made it work in u-boot using the spi-flash
layer, which, AFAIR, is only supporting SPI NORs.

> 
> Due to the page size discrepancy, it's impossible to attach
> ubi volumes on the device.
> 
> Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
> Signed-off-by: John Crispin <john at phrozen.org>
> ---
>  drivers/mtd/nand/raw/nand_ids.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
> index 5423c3bb388e..1610e1cb6bfc 100644
> --- a/drivers/mtd/nand/raw/nand_ids.c
> +++ b/drivers/mtd/nand/raw/nand_ids.c
> @@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = {
>  		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
>  		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
>  		  NAND_ECC_INFO(40, SZ_1K), 4 },
> +	{"W25N01GV 1G 3.3V 8-bit",
> +		{ .id = {0xef, 0xaa} },
> +		  SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
> +		  2, 64, NAND_ECC_INFO(1, SZ_512) },
>  

So, obviously that's a nack on this change, but you're lucky, we just
added the SPI NAND framework, so you should be able to add an entry
here [1].

>  	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
>  	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),

Regards,

Boris

[1]http://git.infradead.org/linux-mtd.git/blob/refs/heads/nand/next:/drivers/mtd/nand/spi/winbond.c#l77