On Fri, 20 Jul 2018 17:15:12 +0200 Miquel Raynal <miquel.raynal at bootlin.com> wrote: > Two helpers have been added to the core to make ECC-related > configuration between the detection phase and the final NAND scan. Use > these hooks and convert the driver to just use nand_scan() instead of > both nand_scan_ident() and nand_scan_tail(). > > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon at bootlin.com> > --- > drivers/mtd/nand/raw/sh_flctl.c | 19 ++++++++----------- > 1 file changed, 8 insertions(+), 11 deletions(-) > > diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c > index d37d1d3ccbf9..663c75005ac9 100644 > --- a/drivers/mtd/nand/raw/sh_flctl.c > +++ b/drivers/mtd/nand/raw/sh_flctl.c > @@ -1002,10 +1002,10 @@ static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) > flctl->index += len; > } > > -static int flctl_chip_init_tail(struct mtd_info *mtd) > +static int flctl_chip_attach_chip(struct nand_chip *chip) > { > + struct mtd_info *mtd = nand_to_mtd(chip); > struct sh_flctl *flctl = mtd_to_flctl(mtd); > - struct nand_chip *chip = &flctl->chip; > > if (chip->options & NAND_BUSWIDTH_16) { > /* > @@ -1073,6 +1073,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) > return 0; > } > > +static const struct nand_controller_ops flctl_nand_controller_ops = { > + .attach_chip = flctl_chip_attach_chip, > +}; > + > static irqreturn_t flctl_handle_flste(int irq, void *dev_id) > { > struct sh_flctl *flctl = dev_id; > @@ -1200,15 +1204,8 @@ static int flctl_probe(struct platform_device *pdev) > > flctl_setup_dma(flctl); > > - ret = nand_scan_ident(flctl_mtd, 1, NULL); > - if (ret) > - goto err_chip; > - > - ret = flctl_chip_init_tail(flctl_mtd); > - if (ret) > - goto err_chip; > - > - ret = nand_scan_tail(flctl_mtd); > + nand->dummy_controller.ops = &flctl_nand_controller_ops; > + ret = nand_scan(flctl_mtd, 1); > if (ret) > goto err_chip; >