[PATCH 2/2] mtd: spi-nor: cadence-quadspi: fix return type to fit wait_for_completion_timeout

[hofrat@xxxxxxxxx (Nicholas Mc Guire)]

 wait_for_completion_timeout returns an unsigned long not int. declare a
suitably type timeout and fix up assignment and check.

Signed-off-by: Nicholas Mc Guire <hofrat at osadl.org>
---

Found during code review.

Given that CQSPI_READ_TIMEOUT_MS is < INT_MAX the type conversion is safe
here but it is cleaner to use proper types.

Patch was compile tested with: socfpga_defconfig (implies
CONFIG_SPI_CADENCE_QUADSPI=y)

Patch is against 4.18-rc5 (localversion-next is next-20180720)

 drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index d7e10b3..f0c3b0f 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -511,6 +511,7 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
 	unsigned int bytes_to_read = 0;
 	u8 *rxbuf_end = rxbuf + n_rx;
 	int ret = 0;
+	unsigned long timeout;
 
 	writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
 	writel(remaining, reg_base + CQSPI_REG_INDIRECTRDBYTES);
@@ -525,13 +526,13 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
 	       reg_base + CQSPI_REG_INDIRECTRD);
 
 	while (remaining > 0) {
-		ret = wait_for_completion_timeout(&cqspi->transfer_complete,
-						  msecs_to_jiffies
-						  (CQSPI_READ_TIMEOUT_MS));
+		timeout = wait_for_completion_timeout(&cqspi->transfer_complete,
+						      msecs_to_jiffies
+						      (CQSPI_READ_TIMEOUT_MS));
 
 		bytes_to_read = cqspi_get_rd_sram_level(cqspi);
 
-		if (!ret && bytes_to_read == 0) {
+		if (!timeout && bytes_to_read == 0) {
 			dev_err(nor->dev, "Indirect read timeout, no bytes\n");
 			ret = -ETIMEDOUT;
 			goto failrd;
-- 
2.1.4