Both nand_scan_ident() and nand_scan_tail() helpers used to be called directly from controller drivers that needed to tweak some ECC-related parameters before nand_scan_tail(). This separation prevented dynamic allocations during the phase of NAND identification, which was inconvenient. All controller drivers have been moved to use nand_scan(), in conjunction with the chip->ecc.[attach|detach]_chip() hooks that actually do the required tweaking sequence between both ident/tail calls, allowing programmers to use dynamic allocation as they need all across the scanning sequence. Declare nand_scan_[ident|tail]() statically now. Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> --- drivers/mtd/nand/raw/nand_base.c | 16 +++++++++------- include/linux/mtd/rawnand.h | 9 ++------- 2 files changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index e7f135c100c2..da99232702a4 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -5924,7 +5924,7 @@ static int nand_dt_init(struct nand_chip *chip) } /** - * nand_scan_ident - [NAND Interface] Scan for the NAND device + * nand_scan_ident - Scan for the NAND device * @mtd: MTD device structure * @maxchips: number of chips to scan for, returns immediately if 0 * @table: alternative NAND ID table @@ -5932,9 +5932,13 @@ static int nand_dt_init(struct nand_chip *chip) * This is the first phase of the normal nand_scan() function. It reads the * flash ID and sets up MTD fields accordingly. * + * This helper used to be called directly from controller drivers that needed + * to tweak some ECC-related parameters before nand_scan_tail(). This separation + * prevented dynamic allocations during this phase which was unconvenient and + * as been banned for the benefit of the ->init_ecc()/cleanup_ecc() hooks. */ -int nand_scan_ident(struct mtd_info *mtd, int maxchips, - struct nand_flash_dev *table) +static int nand_scan_ident(struct mtd_info *mtd, int maxchips, + struct nand_flash_dev *table) { int i, nand_maf_id, nand_dev_id; struct nand_chip *chip = mtd_to_nand(mtd); @@ -6016,7 +6020,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return 0; } -EXPORT_SYMBOL(nand_scan_ident); static int nand_set_ecc_soft_ops(struct mtd_info *mtd) { @@ -6393,14 +6396,14 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) } /** - * nand_scan_tail - [NAND Interface] Scan for the NAND device + * nand_scan_tail - Scan for the NAND device * @mtd: MTD device structure * * This is the second phase of the normal nand_scan() function. It fills out * all the uninitialized function pointers with the defaults and scans for a * bad block table if appropriate. */ -int nand_scan_tail(struct mtd_info *mtd) +static int nand_scan_tail(struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); struct nand_ecc_ctrl *ecc = &chip->ecc; @@ -6724,7 +6727,6 @@ int nand_scan_tail(struct mtd_info *mtd) return ret; } -EXPORT_SYMBOL(nand_scan_tail); static int nand_attach(struct nand_chip *chip) { diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index a20c78e25878..a928771a7ae4 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -36,14 +36,9 @@ static inline int nand_scan(struct mtd_info *mtd, int max_chips) } /* - * Separate phases of nand_scan(), allowing board driver to intervene - * and override command or ECC setup according to flash type. + * Unregister the MTD device and free resources held by the NAND device, must be + * called on error after a successful nand_scan(). */ -int nand_scan_ident(struct mtd_info *mtd, int max_chips, - struct nand_flash_dev *table); -int nand_scan_tail(struct mtd_info *mtd); - -/* Unregister the MTD device and free resources held by the NAND device */ void nand_release(struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ -- 2.14.1