[PATCH v4 01/35] mtd: rawnand: brcmnand: convert driver to nand_scan()

[miquel.raynal@xxxxxxxxxxx (Miquel Raynal)]

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 47 +++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2e5efa0f9ea2..071f09af56dc 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2208,6 +2208,32 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 	return 0;
 }
 
+static int brcmnand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct brcmnand_host *host = nand_get_controller_data(chip);
+	int ret;
+
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	if (brcmnand_setup_dev(host))
+		return -ENXIO;
+
+	chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
+
+	/* only use our internal HW threshold */
+	mtd->bitflip_threshold = 1;
+
+	ret = brcmstb_choose_ecc_layout(host);
+
+	return ret;
+}
+
+static const struct nand_controller_ops brcmnand_controller_ops = {
+	.attach_chip = brcmnand_attach_chip,
+};
+
 static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
@@ -2267,10 +2293,6 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	nand_writereg(ctrl, cfg_offs,
 		      nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH);
 
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret)
-		return ret;
-
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 	/*
 	 * Avoid (for instance) kmap()'d buffers from JFFS2, which we can't DMA
@@ -2279,21 +2301,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	 */
 	chip->options |= NAND_USE_BOUNCE_BUFFER;
 
-	if (chip->bbt_options & NAND_BBT_USE_FLASH)
-		chip->bbt_options |= NAND_BBT_NO_OOB;
-
-	if (brcmnand_setup_dev(host))
-		return -ENXIO;
-
-	chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
-	/* only use our internal HW threshold */
-	mtd->bitflip_threshold = 1;
-
-	ret = brcmstb_choose_ecc_layout(host);
-	if (ret)
-		return ret;
-
-	ret = nand_scan_tail(mtd);
+	ret = nand_scan(mtd, 1);
 	if (ret)
 		return ret;
 
@@ -2434,6 +2442,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 	init_completion(&ctrl->done);
 	init_completion(&ctrl->dma_done);
 	nand_controller_init(&ctrl->controller);
+	ctrl->controller.ops = &brcmnand_controller_ops;
 	INIT_LIST_HEAD(&ctrl->host_list);
 
 	/* NAND register range */
-- 
2.14.1