Make sure __LINUX_ARM_ARCH__ is defined before testing its value. This is needed if we want to allow selection of this driver when COMPILE_TEST=y. Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com> --- drivers/mtd/nand/raw/orion_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c index 27cc902545f3..52d435285a3f 100644 --- a/drivers/mtd/nand/raw/orion_nand.c +++ b/drivers/mtd/nand/raw/orion_nand.c @@ -52,7 +52,7 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *io_base = chip->IO_ADDR_R; -#if __LINUX_ARM_ARCH__ >= 5 +#if defined(__LINUX_ARM_ARCH__) && __LINUX_ARM_ARCH__ >= 5 uint64_t *buf64; #endif int i = 0; @@ -61,7 +61,7 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) *buf++ = readb(io_base); len--; } -#if __LINUX_ARM_ARCH__ >= 5 +#if defined(__LINUX_ARM_ARCH__) && __LINUX_ARM_ARCH__ >= 5 buf64 = (uint64_t *)buf; while (i < len/8) { /* -- 2.14.1