On Tue, 17 Jul 2018 22:27:42 +0200 Arnd Bergmann <arnd at arndb.de> wrote: > Compile-testing this driver on x86 caused a link error: > > ERROR: "__phys_to_dma" [drivers/mtd/nand/raw/qcom_nandc.ko] undefined! > > The problem here is that the driver attempts to convert the physical > address into the DMA controller as a dma_addr_t and calls phys_to_dma() > to do the conversion. > > The correct way to do the conversion is using the dma mapping interfaces. > > Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") > Signed-off-by: Arnd Bergmann <arnd at arndb.de> Reviewed-by: Boris Brezillon <boris.brezillon at bootlin.com> Miquel, can you fix the subject prefix when applying? Thanks, Boris > --- > drivers/mtd/nand/raw/qcom_nandc.c | 30 +++++++++++++++++++++--------- > 1 file changed, 21 insertions(+), 9 deletions(-) > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c > index 994f980c6d86..645630953f38 100644 > --- a/drivers/mtd/nand/raw/qcom_nandc.c > +++ b/drivers/mtd/nand/raw/qcom_nandc.c > @@ -2957,14 +2957,6 @@ static int qcom_nandc_probe(struct platform_device *pdev) > > nandc->props = dev_data; > > - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - nandc->base = devm_ioremap_resource(dev, res); > - if (IS_ERR(nandc->base)) > - return PTR_ERR(nandc->base); > - > - nandc->base_phys = res->start; > - nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start); > - > nandc->core_clk = devm_clk_get(dev, "core"); > if (IS_ERR(nandc->core_clk)) > return PTR_ERR(nandc->core_clk); > @@ -2977,9 +2969,21 @@ static int qcom_nandc_probe(struct platform_device *pdev) > if (ret) > return ret; > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + nandc->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(nandc->base)) > + return PTR_ERR(nandc->base); > + > + nandc->base_phys = res->start; > + nandc->base_dma = dma_map_resource(dev, res->start, > + resource_size(res), > + DMA_BIDIRECTIONAL, 0); > + if (!nandc->base_dma) > + return -ENXIO; > + > ret = qcom_nandc_alloc(nandc); > if (ret) > - goto err_core_clk; > + goto err_nandc_alloc; > > ret = clk_prepare_enable(nandc->core_clk); > if (ret) > @@ -3005,6 +3009,9 @@ static int qcom_nandc_probe(struct platform_device *pdev) > clk_disable_unprepare(nandc->core_clk); > err_core_clk: > qcom_nandc_unalloc(nandc); > +err_nandc_alloc: > + dma_unmap_resource(dev, res->start, resource_size(res), > + DMA_BIDIRECTIONAL, 0); > > return ret; > } > @@ -3012,16 +3019,21 @@ static int qcom_nandc_probe(struct platform_device *pdev) > static int qcom_nandc_remove(struct platform_device *pdev) > { > struct qcom_nand_controller *nandc = platform_get_drvdata(pdev); > + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > struct qcom_nand_host *host; > > list_for_each_entry(host, &nandc->host_list, node) > nand_release(nand_to_mtd(&host->chip)); > > + > qcom_nandc_unalloc(nandc); > > clk_disable_unprepare(nandc->aon_clk); > clk_disable_unprepare(nandc->core_clk); > > + dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), > + DMA_BIDIRECTIONAL, 0); > + > return 0; > } >