Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> --- drivers/mtd/nand/raw/mtk_nand.c | 71 +++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 31 deletions(-) diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index 75c845adb050..a81cd36596e1 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -1250,13 +1250,50 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd) return 0; } +static int mtk_nfc_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct device *dev = mtd->dev.parent; + struct mtk_nfc *nfc = nand_get_controller_data(chip); + struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip); + int len; + int ret; + + if (chip->options & NAND_BUSWIDTH_16) { + dev_err(dev, "16bits buswidth not supported"); + return -EINVAL; + } + + /* store bbt magic in page, cause OOB is not protected */ + if (chip->bbt_options & NAND_BBT_USE_FLASH) + chip->bbt_options |= NAND_BBT_NO_OOB; + + ret = mtk_nfc_ecc_init(dev, mtd); + if (ret) + return ret; + + ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd); + if (ret) + return ret; + + mtk_nfc_set_fdm(&mtk_nand->fdm, mtd); + mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd); + + len = mtd->writesize + mtd->oobsize; + nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL); + if (!nfc->buffer) + return -ENOMEM; + + return 0; +} + static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, struct device_node *np) { struct mtk_nfc_nand_chip *chip; struct nand_chip *nand; struct mtd_info *mtd; - int nsels, len; + int nsels; u32 tmp; int ret; int i; @@ -1324,36 +1361,8 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, mtk_nfc_hw_init(nfc); - ret = nand_scan_ident(mtd, nsels, NULL); - if (ret) - return ret; - - /* store bbt magic in page, cause OOB is not protected */ - if (nand->bbt_options & NAND_BBT_USE_FLASH) - nand->bbt_options |= NAND_BBT_NO_OOB; - - ret = mtk_nfc_ecc_init(dev, mtd); - if (ret) - return -EINVAL; - - if (nand->options & NAND_BUSWIDTH_16) { - dev_err(dev, "16bits buswidth not supported"); - return -EINVAL; - } - - ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd); - if (ret) - return ret; - - mtk_nfc_set_fdm(&chip->fdm, mtd); - mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd); - - len = mtd->writesize + mtd->oobsize; - nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL); - if (!nfc->buffer) - return -ENOMEM; - - ret = nand_scan_tail(mtd); + nand->controller->attach_chip = mtk_nfc_attach_chip; + ret = nand_scan(mtd, nsels); if (ret) return ret; -- 2.14.1