Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> --- drivers/mtd/nand/raw/txx9ndfmc.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c index b567d212fe7d..cac22dda799e 100644 --- a/drivers/mtd/nand/raw/txx9ndfmc.c +++ b/drivers/mtd/nand/raw/txx9ndfmc.c @@ -254,21 +254,17 @@ static void txx9ndfmc_initialize(struct platform_device *dev) #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \ DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000) -static int txx9ndfmc_nand_scan(struct mtd_info *mtd) +static int txx9ndfmc_attach_chip(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); - int ret; + struct mtd_info *mtd = nand_to_mtd(chip); - ret = nand_scan_ident(mtd, 1, NULL); - if (!ret) { - if (mtd->writesize >= 512) { - /* Hardware ECC 6 byte ECC per 512 Byte data */ - chip->ecc.size = 512; - chip->ecc.bytes = 6; - } - ret = nand_scan_tail(mtd); + if (mtd->writesize >= 512) { + /* Hardware ECC 6 byte ECC per 512 Byte data */ + chip->ecc.size = 512; + chip->ecc.bytes = 6; } - return ret; + + return 0; } static int __init txx9ndfmc_probe(struct platform_device *dev) @@ -332,7 +328,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) chip->ecc.correct = txx9ndfmc_correct_data; chip->ecc.hwctl = txx9ndfmc_enable_hwecc; chip->ecc.mode = NAND_ECC_HW; - /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ + /* nand_scan() will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; chip->ecc.strength = 1; @@ -359,7 +355,8 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) if (plat->wide_mask & (1 << i)) chip->options |= NAND_BUSWIDTH_16; - if (txx9ndfmc_nand_scan(mtd)) { + chip->controller->attach_chip = txx9ndfmc_attach_chip; + if (nand_scan(mtd, 1)) { kfree(txx9_priv->mtdname); kfree(txx9_priv); continue; -- 2.14.1