Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com> --- drivers/mtd/nand/raw/fsl_elbc_nand.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index 51f0b340bc0d..e535c8440f63 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c @@ -637,9 +637,9 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP; } -static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) +static int fsl_elbc_attach_chip(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); + struct mtd_info *mtd = nand_to_mtd(chip); struct fsl_elbc_mtd *priv = nand_get_controller_data(chip); struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; @@ -910,15 +910,8 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) if (ret) goto err; - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) - goto err; - - ret = fsl_elbc_chip_init_tail(mtd); - if (ret) - goto err; - - ret = nand_scan_tail(mtd); + priv->chip->controller->attach_chip = fsl_elbc_attach_chip; + ret = nand_scan(mtd, 1); if (ret) goto err; -- 2.14.1