On Tue, 2017-04-18 at 11:42 +0200, Borislav Petkov wrote: > On Tue, Mar 07, 2017 at 04:32:39PM -0800, Ricardo Neri wrote: > > When computing a linear address and segmentation is used, we need to know > > the base address of the segment involved in the computation. In most of > > the cases, the segment base address will be zero as in USER_DS/USER32_DS. > > However, it may be possible that a user space program defines its own > > segments via a local descriptor table. In such a case, the segment base > > address may not be zero .Thus, the segment base address is needed to > > calculate correctly the linear address. > > > > The segment selector to be used when computing a linear address is > > determined by either any of segment select override prefixes in the > > instruction or inferred from the registers involved in the computation of > > the effective address; in that order. Also, there are cases when the > > overrides shall be ignored. > > > > For clarity, this process can be split into two steps: resolving the > > relevant segment and, once known, read the applicable segment selector. > > The method to obtain the segment selector depends on several factors. In > > 32-bit builds, segment selectors are saved into the pt_regs structure > > when switching to kernel mode. The same is also true for virtual-8086 > > mode. In 64-bit builds, segmentation is mostly ignored, except when > > running a program in 32-bit legacy mode. In this case, CS and SS can be > > obtained from pt_regs. DS, ES, FS and GS can be read directly from > > registers. > > > Lastly, segmentation is possible in 64-bit mode via FS and GS. > > I'd say "Lastly, the only two segment registers which are not ignored in > long mode are FS and GS." I will make this clarification. > > > In these two cases, base addresses are obtained from the relevant MSRs. > > s/relevant/respective/ Will clarify. > > > Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx> > > Cc: Adam Buchbinder <adam.buchbinder@xxxxxxxxx> > > Cc: Colin Ian King <colin.king@xxxxxxxxxxxxx> > > Cc: Lorenzo Stoakes <lstoakes@xxxxxxxxx> > > Cc: Qiaowei Ren <qiaowei.ren@xxxxxxxxx> > > Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx> > > Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx> > > Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx> > > Cc: Kees Cook <keescook@xxxxxxxxxxxx> > > Cc: Thomas Garnier <thgarnie@xxxxxxxxxx> > > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx> > > Cc: Borislav Petkov <bp@xxxxxxx> > > Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx> > > Cc: Ravi V. Shankar <ravi.v.shankar@xxxxxxxxx> > > Cc: x86@xxxxxxxxxx > > Signed-off-by: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx> > > --- > > arch/x86/lib/insn-eval.c | 195 +++++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 195 insertions(+) > > > > diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c > > index 78df1c9..8d45df8 100644 > > --- a/arch/x86/lib/insn-eval.c > > +++ b/arch/x86/lib/insn-eval.c > > @@ -8,6 +8,7 @@ > > #include <asm/inat.h> > > #include <asm/insn.h> > > #include <asm/insn-eval.h> > > +#include <asm/vm86.h> > > > > enum reg_type { > > REG_TYPE_RM = 0, > > @@ -15,6 +16,200 @@ enum reg_type { > > REG_TYPE_BASE, > > }; > > > > +enum segment { > > + SEG_CS = 0x23, > > + SEG_SS = 0x36, > > + SEG_DS = 0x3e, > > + SEG_ES = 0x26, > > + SEG_FS = 0x64, > > + SEG_GS = 0x65 > > +}; > > + > > +/** > > + * resolve_seg_selector() - obtain segment selector > > + * @regs: Set of registers containing the segment selector > > That arg is gone. This came from one of my initial implementations. I will remove it. > > > + * @insn: Instruction structure with selector override prefixes > > + * @regoff: Operand offset, in pt_regs, of which the selector is needed > > + * @default: Resolve default segment selector (i.e., ignore overrides) > > + * > > + * The segment selector to which an effective address refers depends on > > + * a) segment selector overrides instruction prefixes or b) the operand > > + * register indicated in the ModRM or SiB byte. > > + * > > + * For case a), the function inspects any prefixes in the insn instruction; > > s/insn // In this case I meant "any prefixes in the insn structure". Probably it will make it more clear. > > > + * insn can be null to indicate that selector override prefixes shall be > > + * ignored. > > This is not what the code does: it returns -EINVAL when insn is NULL. This was the behavior in a previous implementation. I will update it. > > > This is useful when the use of prefixes is forbidden (e.g., > > + * obtaining the code selector). For case b), the operand register shall be > > + * represented as the offset from the base address of pt_regs. Also, regoff > > + * can be -EINVAL for cases in which registers are not used as operands (e.g., > > + * when the mod and r/m parts of the ModRM byte are 0 and 5, respectively). > > + * > > + * This function returns the segment selector to utilize as per the conditions > > + * described above. Please note that this functin does not return the value > > + * of the segment selector. The value of the segment selector needs to be > > + * obtained using get_segment_selector and passing the segment selector type > > + * resolved by this function. > > + * > > + * Return: Segment selector to use, among CS, SS, DS, ES, FS or GS. > > : negative value when... I will document this behavior. > > > + */ > > +static int resolve_seg_selector(struct insn *insn, int regoff, bool get_default) > > +{ > > + int i; > > + > > + if (!insn) > > + return -EINVAL; > > + > > + if (get_default) > > + goto default_seg; > > + /* > > + * Check first if we have selector overrides. Having more than > > + * one selector override leads to undefined behavior. We > > + * only use the first one and return > > Well, I'd return -EINVAL to catch that undefined behavior. Note in a > local var that I've already seen a seg reg and then if I see another > one, return -EINVAL. Sure. Will do. > > > + */ > > + for (i = 0; i < insn->prefixes.nbytes; i++) { > > + switch (insn->prefixes.bytes[i]) { > > + case SEG_CS: > > + return SEG_CS; > > + case SEG_SS: > > + return SEG_SS; > > + case SEG_DS: > > + return SEG_DS; > > + case SEG_ES: > > + return SEG_ES; > > + case SEG_FS: > > + return SEG_FS; > > + case SEG_GS: > > + return SEG_GS; > > So what happens if you're in 64-bit mode and you have CS, DS, ES, or SS? > Or is this what @get_default is supposed to do? But it doesn't look like > it, it still returns segments ignored in 64-bit mode. I regard that the role of this function is to obtain the the segment selector from either of the prefixes or inferred from the operands. It is the role of caller to determine if the segment selector should be ignored. So far the only caller is insn_get_seg_base() [1]. If in long mode, the segment base address is regarded as 0 unless the segment selector is FS or GS. > > > + default: > > + return -EINVAL; > > + } > > + } > > + > > +default_seg: > > + /* > > + * If no overrides, use default selectors as described in the > > + * Intel documentation: SS for ESP or EBP. DS for all data references, > > + * except when relative to stack or string destination. > > + * Also, AX, CX and DX are not valid register operands in 16-bit > > + * address encodings. > > + * Callers must interpret the result correctly according to the type > > + * of instructions (e.g., use ES for string instructions). > > + * Also, some values of modrm and sib might seem to indicate the use > > + * of EBP and ESP (e.g., modrm_mod = 0, modrm_rm = 5) but actually > > + * they refer to cases in which only a displacement used. These cases > > + * should be indentified by the caller and not with this function. > > + */ > > + switch (regoff) { > > + case offsetof(struct pt_regs, ax): > > + /* fall through */ > > + case offsetof(struct pt_regs, cx): > > + /* fall through */ > > + case offsetof(struct pt_regs, dx): > > + if (insn && insn->addr_bytes == 2) > > + return -EINVAL; > > + case -EDOM: /* no register involved in address computation */ > > + case offsetof(struct pt_regs, bx): > > + /* fall through */ > > + case offsetof(struct pt_regs, di): > > + /* fall through */ > > return SEG_ES; > > ? I double-checked the latest version of the Intel Software Development manual [2], in the table 3-5 in section 3.7.4 mentions that DS is default segment for all data references, except string destinations. I tested this code with the UMIP-protected instructions and whenever I use %edi the default segment is %ds. > > It is even in the comment above. This function does not decode instructions but only the segment selectors. This is the reason I added a comment about callers using the segment carefully when string instructions. Perhaps I can move the comment to the function documentation. Given that string instructions seem to be the only exception, the function could take a boolean parameter if the segment is to be obtained for a destination string operand. How does this sound? > I'm looking at MOVS %es:%rdi, %ds:%rsi, > for example. Is this example valid? The documentation of MOVS specifies that it always moves DS:(E)SI to ES:(E)DI. > > > + case offsetof(struct pt_regs, si): > > + return SEG_DS; > > + case offsetof(struct pt_regs, bp): > > + /* fall through */ > > + case offsetof(struct pt_regs, sp): > > + return SEG_SS; > > + case offsetof(struct pt_regs, ip): > > + return SEG_CS; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +/** > > + * get_segment_selector() - obtain segment selector > > + * @regs: Set of registers containing the segment selector > > + * @seg_type: Type of segment selector to obtain > > + * @regoff: Operand offset, in pt_regs, of which the selector is needed > > That's gone. I will remove it. > > > + * > > + * Obtain the segment selector for any of CS, SS, DS, ES, FS, GS. In > > + * CONFIG_X86_32, the segment is obtained from either pt_regs or > > + * kernel_vm86_regs as applicable. In CONFIG_X86_64, CS and SS are obtained > > + * from pt_regs. DS, ES, FS and GS are obtained by reading the ds and es, fs > > + * and gs, respectively. > > ... and DS and ES are ignored in long mode. I will clarify that callers need to ignore DS and ES if in long mode. > > > + * > > + * Return: Value of the segment selector > > ... or negative... I will complement documentation on this specific case. Thanks and BR, Ricardo -- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html