On Tue, Mar 07, 2017 at 04:32:36PM -0800, Ricardo Neri wrote:
> Section 2.2.1.2 of the Intel 64 and IA-32 Architectures Software
> Developer's Manual volume 2A states that when a SIB byte is used and the
> base of the SIB byte points to R/EBP (i.e., base = 5) and the mod part
> of the ModRM byte is zero, the value of such register will not be used
> as part of the address computation. To signal this, a -EDOM error is
> returned to indicate callers that they should ignore the value.
>
> Also, for this particular case, a displacement of 32-bits should follow
> the SIB byte if the mod part of ModRM is equal to zero. The instruction
> decoder ensures that this is the case.
>
> Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
> Cc: Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
> Cc: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> Cc: Lorenzo Stoakes <lstoakes@xxxxxxxxx>
> Cc: Qiaowei Ren <qiaowei.ren@xxxxxxxxx>
> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> Cc: Nathan Howard <liverlint@xxxxxxxxx>
> Cc: Adan Hawthorn <adanhawthorn@xxxxxxxxx>
> Cc: Joe Perches <joe@xxxxxxxxxxx>
> Cc: Ravi V. Shankar <ravi.v.shankar@xxxxxxxxx>
> Cc: x86@xxxxxxxxxx
> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
> ---
> arch/x86/mm/mpx.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
> index d9e92d6..ef7eb67 100644
> --- a/arch/x86/mm/mpx.c
> +++ b/arch/x86/mm/mpx.c
> @@ -121,6 +121,17 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
>
> case REG_TYPE_BASE:
> regno = X86_SIB_BASE(insn->sib.value);
> + /*
> + * If mod is 0 and register R/EBP (regno=5) is indicated in the
> + * base part of the SIB byte,
you can simply say here: "if SIB.base == 5, the base of the
register-indirect addressing is 0."
> the value of such register should
> + * not be used in the address computation. Also, a 32-bit
Not "Also" but "In this case, a 32-bit displacement..."
> + * displacement is expected in this case; the instruction
> + * decoder takes care of it. This is true for both R13 and
> + * R/EBP as REX.B will not be decoded.
You don't need that sentence as the only thing that matters is ModRM.mod
being 0.
> + */
> + if (regno == 5 && X86_MODRM_MOD(insn->modrm.value) == 0)
The 0 test we normally do with the ! (also flip parts of if-condition):
if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
> + return -EDOM;
> +
> if (X86_REX_B(insn->rex_prefix.value))
> regno += 8;
> break;
> @@ -161,16 +172,21 @@ static void __user *mpx_get_addr_ref(struct insn *insn, struct pt_regs *regs)
> eff_addr = regs_get_register(regs, addr_offset);
> } else {
> if (insn->sib.nbytes) {
> + /*
> + * Negative values in the base and index offset means
> + * an error when decoding the SIB byte. Except -EDOM,
> + * which means that the registers should not be used
> + * in the address computation.
> + */
> base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE);
> - if (base_offset < 0)
> + if (unlikely(base_offset == -EDOM))
> + base = 0;
> + else if (unlikely(base_offset < 0))
Bah, unlikely's in something which is not really a hot path. They only
encumber readability, no need for them.
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
--
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
