Tasks running in virtual-8086 mode or in protected mode with code
segment descriptors that specify 16-bit default address sizes via the
D bit will use 16-bit addressing form encodings as described in the Intel
64 and IA-32 Architecture Software Developer's Manual Volume 2A Section
2.1.5. 16-bit addressing encodings differ in several ways from the
32-bit/64-bit addressing form encodings: the r/m part of the ModRM byte
points to different registers and, in some cases, addresses can be
indicated by the addition of the value of two registers. Also, there is
no support for SiB bytes. Thus, a separate function is needed to parse
this form of addressing.
A couple of functions are introduced. get_reg_offset_16 obtains the
offset from the base of pt_regs of the registers indicated by the ModRM
byte of the address encoding. insn_get_addr_ref_16 computes the linear
address indicated by the instructions using the value of the registers
given by ModRM as well as the base address of the segment.
Lastly, the original function insn_get_addr_ref is renamed as
insn_get_addr_ref_32_64. A new insn_get_addr_ref function decides what
type of address decoding must be done base on the number of address bytes
given by the instruction. Documentation for insn_get_addr_ref_32_64 is
also improved.
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
Cc: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Cc: Lorenzo Stoakes <lstoakes@xxxxxxxxx>
Cc: Qiaowei Ren <qiaowei.ren@xxxxxxxxx>
Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Thomas Garnier <thgarnie@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxx>
Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: Ravi V. Shankar <ravi.v.shankar@xxxxxxxxx>
Cc: x86@xxxxxxxxxx
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
---
arch/x86/lib/insn-eval.c | 137 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 137 insertions(+)
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index a9a1704..cb1076d 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -306,6 +306,73 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
}
/**
+ * get_reg_offset_16 - Obtain offset of register indicated by instruction
+ * @insn: Instruction structure containing ModRM and SiB bytes
+ * @regs: Set of registers referred by the instruction
+ * @offs1: Offset of the first operand register
+ * @offs2: Offset of the second opeand register, if applicable.
+ *
+ * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
+ * within insn. This function is to be used with 16-bit address encodings. The
+ * offs1 and offs2 will be written with the offset of the two registers
+ * indicated by the instruction. In cases where any of the registers is not
+ * referenced by the instruction, the value will be set to -EDOM.
+ *
+ * Return: 0 on success, -EINVAL on failure.
+ */
+static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
+ int *offs1, int *offs2)
+{
+ /* 16-bit addressing can use one or two registers */
+ static const int regoff1[] = {
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bx),
+ };
+
+ static const int regoff2[] = {
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ };
+
+ if (!offs1 || !offs2)
+ return -EINVAL;
+
+ /* operand is a register, use the generic function */
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ *offs1 = insn_get_reg_offset_modrm_rm(insn, regs);
+ *offs2 = -EDOM;
+ return 0;
+ }
+
+ *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
+ *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];
+
+ /*
+ * If no displacement is indicated in the mod part of the ModRM byte,
+ * (mod part is 0) and the r/m part of the same byte is 6, no register
+ * is used caculate the operand address. An r/m part of 6 means that
+ * the second register offset is already invalid.
+ */
+ if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
+ (X86_MODRM_RM(insn->modrm.value) == 6))
+ *offs1 = -EDOM;
+
+ return 0;
+}
+
+/**
* get_desc() - Obtain address of segment descriptor
* @seg: Segment selector
* @desc: Pointer to the selected segment descriptor
@@ -559,6 +626,76 @@ int insn_get_reg_offset_sib_index(struct insn *insn, struct pt_regs *regs)
return get_reg_offset(insn, regs, REG_TYPE_INDEX);
}
+/**
+ * insn_get_addr_ref_16 - Obtain the 16-bit address referred by instruction
+ * @insn: Instruction structure containing ModRM byte and displacement
+ * @regs: Set of registers referred by the instruction
+ *
+ * This function is to be used with 16-bit address encodings. Obtain the memory
+ * address referred by the instruction's ModRM bytes and displacement. Also, the
+ * segment used as base is determined by either any segment override prefixes in
+ * insn or the default segment of the registers involved in the address
+ * computation.
+ * the ModRM byte
+ *
+ * Return: linear address referenced by instruction and registers
+ */
+static void __user *insn_get_addr_ref_16(struct insn *insn,
+ struct pt_regs *regs)
+{
+ unsigned long linear_addr, seg_base_addr;
+ short eff_addr, addr1 = 0, addr2 = 0;
+ int addr_offset1, addr_offset2;
+ int ret;
+
+ insn_get_modrm(insn);
+ insn_get_displacement(insn);
+
+ /*
+ * If operand is a register, the layout is the same as in
+ * 32-bit and 64-bit addressing.
+ */
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ addr_offset1 = get_reg_offset(insn, regs, REG_TYPE_RM);
+ if (addr_offset1 < 0)
+ goto out_err;
+ eff_addr = regs_get_register(regs, addr_offset1);
+ seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1,
+ false);
+ } else {
+ ret = get_reg_offset_16(insn, regs, &addr_offset1,
+ &addr_offset2);
+ if (ret < 0)
+ goto out_err;
+ /*
+ * Don't fail on invalid offset values. They might be invalid
+ * because they cannot be used for this particular value of
+ * the ModRM. Instead, use them in the computation only if
+ * they contain a valid value.
+ */
+ if (addr_offset1 != -EDOM)
+ addr1 = 0xffff & regs_get_register(regs, addr_offset1);
+ if (addr_offset2 != -EDOM)
+ addr2 = 0xffff & regs_get_register(regs, addr_offset2);
+ eff_addr = addr1 + addr2;
+ /*
+ * The first register is in the operand implies the SS or DS
+ * segment selectors, the second register in the operand can
+ * only imply DS. Thus, use the first register to obtain
+ * the segment selector.
+ */
+ seg_base_addr = insn_get_seg_base(regs, insn, addr_offset1,
+ false);
+
+ eff_addr += (insn->displacement.value & 0xffff);
+ }
+ linear_addr = (unsigned short)eff_addr + seg_base_addr;
+
+ return (void __user *)linear_addr;
+out_err:
+ return (void __user *)-1;
+}
+
static inline long __to_signed_long(unsigned long val, int long_bytes)
{
#ifdef CONFIG_X86_64
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
