These functions read the default values of the address and operand sizes
as specified in the segment descriptor. This information is determined
from the D and L bits. Hence, it can be used for both IA-32e 64-bit and
32-bit legacy modes. For virtual-8086 mode, the default address and
operand sizes are always 2 bytes.
The D bit is only meaningful for code segments. Thus, these functions
always use the code segment selector contained in regs.
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
Cc: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Cc: Lorenzo Stoakes <lstoakes@xxxxxxxxx>
Cc: Qiaowei Ren <qiaowei.ren@xxxxxxxxx>
Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Thomas Garnier <thgarnie@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxx>
Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: Ravi V. Shankar <ravi.v.shankar@xxxxxxxxx>
Cc: x86@xxxxxxxxxx
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/insn-eval.h | 2 +
arch/x86/lib/insn-eval.c | 80 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/arch/x86/include/asm/insn-eval.h b/arch/x86/include/asm/insn-eval.h
index 0de3083..cd4008251 100644
--- a/arch/x86/include/asm/insn-eval.h
+++ b/arch/x86/include/asm/insn-eval.h
@@ -15,6 +15,8 @@ void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs);
int insn_get_reg_offset_modrm_rm(struct insn *insn, struct pt_regs *regs);
int insn_get_reg_offset_sib_base(struct insn *insn, struct pt_regs *regs);
int insn_get_reg_offset_sib_base(struct insn *insn, struct pt_regs *regs);
+unsigned char insn_get_seg_default_address_bytes(struct pt_regs *regs);
+unsigned char insn_get_seg_default_operand_bytes(struct pt_regs *regs);
unsigned long insn_get_seg_base(struct pt_regs *regs, struct insn *insn,
int regoff);
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index 4e3f797..3fe4ddb 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -365,6 +365,86 @@ unsigned long insn_get_seg_base(struct pt_regs *regs, struct insn *insn,
}
/**
+ * insn_get_seg_default_address_bytes - Obtain default address size of segment
+ * @regs: Set of registers containing the segment selector
+ *
+ * Obtain the default address size as indicated in the segment descriptor
+ * selected in regs' code segment selector. In protected mode, the default
+ * address is determined by inspecting the L and D bits of the segment
+ * descriptor. In virtual-8086 mode, the default is always two bytes.
+ *
+ * Return: Default address size of segment
+ */
+unsigned char insn_get_seg_default_address_bytes(struct pt_regs *regs)
+{
+ struct desc_struct *desc;
+ unsigned short seg;
+ int ret;
+
+ if (v8086_mode(regs))
+ return 2;
+
+ seg = (unsigned short)regs->cs;
+
+ ret = get_desc(seg, &desc);
+ if (ret)
+ return 0;
+
+ switch ((desc->l << 1) | desc->d) {
+ case 0: /* Legacy mode. 16-bit addresses. CS.L=0, CS.D=0 */
+ return 2;
+ case 1: /* Legacy mode. 32-bit addresses. CS.L=0, CS.D=1 */
+ return 4;
+ case 2: /* IA-32e 64-bit mode. 64-bit addresses. CS.L=1, CS.D=0 */
+ return 8;
+ case 3: /* Invalid setting. CS.L=1, CS.D=1 */
+ /* fall through */
+ default:
+ return 0;
+ }
+}
+
+/**
+ * insn_get_seg_default_operand_bytes - Obtain default operand size of segment
+ * @regs: Set of registers containing the segment selector
+ *
+ * Obtain the default operand size as indicated in the segment descriptor
+ * selected in regs' code segment selector. In protected mode, the default
+ * operand size is determined by inspecting the L and D bits of the segment
+ * descriptor. In virtual-8086 mode, the default is always two bytes.
+ *
+ * Return: Default operand size of segment
+ */
+unsigned char insn_get_seg_default_operand_bytes(struct pt_regs *regs)
+{
+ struct desc_struct *desc;
+ unsigned short seg;
+ int ret;
+
+ if (v8086_mode(regs))
+ return 2;
+
+ seg = (unsigned short)regs->cs;
+
+ ret = get_desc(seg, &desc);
+ if (ret)
+ return 0;
+
+ switch ((desc->l << 1) | desc->d) {
+ case 0: /* Legacy mode. 16-bit or 8-bit operands CS.L=0, CS.D=0 */
+ return 2;
+ case 1: /* Legacy mode. 32- or 8 bit operands CS.L=0, CS.D=1 */
+ /* fall through */
+ case 2: /* IA-32e 64-bit mode. 32- or 8-bit opnds. CS.L=1, CS.D=0 */
+ return 4;
+ case 3: /* Invalid setting. CS.L=1, CS.D=1 */
+ /* fall through */
+ default:
+ return 0;
+ }
+}
+
+/**
* insn_get_reg_offset_modrm_rm - Obtain register in r/m part of ModRM byte
* @insn: Instruction structure containing the ModRM byte
* @regs: Set of registers indicated by the ModRM byte
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
