Re: [PATCH v5 2/2] arch/riscv: Enable kprobes when CONFIG_MODULES=n

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26/03/2024 17:49, Jarkko Sakkinen wrote:
On Tue Mar 26, 2024 at 3:57 PM EET, Alexandre Ghiti wrote:
Hi Jarkko,

On 25/03/2024 22:55, Jarkko Sakkinen wrote:
Tacing with kprobes while running a monolithic kernel is currently
impossible due the kernel module allocator dependency.

Address the issue by implementing textmem API for RISC-V.

Link: https://www.sochub.fi # for power on testing new SoC's with a minimal stack
Link: https://lore.kernel.org/all/20220608000014.3054333-1-jarkko@xxxxxxxxxxx/ # continuation
Signed-off-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
---
v5:
- No changes, expect removing alloc_execmem() call which should have
    been part of the previous patch.
v4:
- Include linux/execmem.h.
v3:
- Architecture independent parts have been split to separate patches.
- Do not change arch/riscv/kernel/module.c as it is out of scope for
    this patch set now.
v2:
- Better late than never right? :-)
- Focus only to RISC-V for now to make the patch more digestable. This
    is the arch where I use the patch on a daily basis to help with QA.
- Introduce HAVE_KPROBES_ALLOC flag to help with more gradual migration.
---
   arch/riscv/Kconfig          |  1 +
   arch/riscv/kernel/Makefile  |  3 +++
   arch/riscv/kernel/execmem.c | 22 ++++++++++++++++++++++
   3 files changed, 26 insertions(+)
   create mode 100644 arch/riscv/kernel/execmem.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e3142ce531a0..499512fb17ff 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -132,6 +132,7 @@ config RISCV
   	select HAVE_KPROBES if !XIP_KERNEL
   	select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
   	select HAVE_KRETPROBES if !XIP_KERNEL
+	select HAVE_ALLOC_EXECMEM if !XIP_KERNEL
   	# https://github.com/ClangBuiltLinux/linux/issues/1881
   	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if !LD_IS_LLD
   	select HAVE_MOVE_PMD
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 604d6bf7e476..337797f10d3e 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -73,6 +73,9 @@ obj-$(CONFIG_SMP)		+= cpu_ops.o
obj-$(CONFIG_RISCV_BOOT_SPINWAIT) += cpu_ops_spinwait.o
   obj-$(CONFIG_MODULES)		+= module.o
+ifeq ($(CONFIG_ALLOC_EXECMEM),y)
+obj-y				+= execmem.o
+endif
   obj-$(CONFIG_MODULE_SECTIONS)	+= module-sections.o
obj-$(CONFIG_CPU_PM) += suspend_entry.o suspend.o
diff --git a/arch/riscv/kernel/execmem.c b/arch/riscv/kernel/execmem.c
new file mode 100644
index 000000000000..3e52522ead32
--- /dev/null
+++ b/arch/riscv/kernel/execmem.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/mm.h>
+#include <linux/execmem.h>
+#include <linux/vmalloc.h>
+#include <asm/sections.h>
+
+void *alloc_execmem(unsigned long size, gfp_t /* gfp */)
Need to have the parameter name here. I guess this could just as well
pass through gfp to vmalloc from the caller as kprobes does call
module_alloc() with GFP_KERNEL set in RISC-V.

+{
+	return __vmalloc_node_range(size, 1, MODULES_VADDR,
+				    MODULES_END, GFP_KERNEL,
+				    PAGE_KERNEL, 0, NUMA_NO_NODE,
+				    __builtin_return_address(0));
+}

The __vmalloc_node_range() line ^^ must be from an old kernel since we
added VM_FLUSH_RESET_PERMS in 6.8, see 749b94b08005 ("riscv: Fix
module_alloc() that did not reset the linear mapping permissions").

In addition, I guess module_alloc() should now use alloc_execmem() right?
Ack for the first comment. For the 2nd it is up to arch/<arch> to choose
whether to have shared or separate allocators.

So if you want I can change it that way but did not want to make the
call myself.


I'd say module_alloc() should use alloc_execmem() then since there are no differences for now.



+
+void free_execmem(void *region)
+{
+	if (in_interrupt())
+		pr_warn("In interrupt context: vmalloc may not work.\n");
+
+	vfree(region);
+}

I remember Mike Rapoport sent a patchset to introduce an API for
executable memory allocation
(https://lore.kernel.org/linux-mm/20230918072955.2507221-1-rppt@xxxxxxxxxx/),
how does this intersect with your work? I don't know the status of his
patchset though.

Thanks,

Alex
I have also made a patch set for kprobes in the 2022:

https://lore.kernel.org/all/20220608000014.3054333-1-jarkko@xxxxxxxxxxx/

I think this Calvin's, Mike's and my early patch set have the same
problem: they try to choke all architectures at once. And further,
Calvin's and Mike's work also try to cover also tracing subsystems
at once.

I feel that my relatively small patch set which deals only with
trivial kprobe (which is more in the leaf than e.g. bpf which
is more like orchestrator tool) and implements one arch of which
dog food I actually eat is a better starting point.

Arch code is always something where you need to have genuine
understanding so full architecture coverage from day one is
just too risky for stability. Linux is better off if people who
work on a  specific arch proactively will "fill the holes".

So the way I see my patch set is "lowest common denominator"
in both architecture axis and tracing subsystem axist. It should
not interfere that much with the other work (like bpf).


I understand your point. But is there any consensus among you on how to deal with this issue? I'm not opposed at all to your patch, and it's small enough that we can revert it later on if that's not the right solution anyway.



BR, Jarkko

_______________________________________________
linux-riscv mailing list
linux-riscv@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-riscv




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux