On Fri, Feb 16, 2024 at 8:57 AM Vlastimil Babka <vbabka@xxxxxxx> wrote:
>
> On 2/12/24 22:38, Suren Baghdasaryan wrote:
> > Introduce CONFIG_MEM_ALLOC_PROFILING which provides definitions to easily
> > instrument memory allocators. It registers an "alloc_tags" codetag type
> > with /proc/allocinfo interface to output allocation tag information when
> > the feature is enabled.
> > CONFIG_MEM_ALLOC_PROFILING_DEBUG is provided for debugging the memory
> > allocation profiling instrumentation.
> > Memory allocation profiling can be enabled or disabled at runtime using
> > /proc/sys/vm/mem_profiling sysctl when CONFIG_MEM_ALLOC_PROFILING_DEBUG=n.
> > CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT enables memory allocation
> > profiling by default.
> >
> > Signed-off-by: Suren Baghdasaryan <surenb@xxxxxxxxxx>
> > Co-developed-by: Kent Overstreet <kent.overstreet@xxxxxxxxx>
> > Signed-off-by: Kent Overstreet <kent.overstreet@xxxxxxxxx>
> > ---
> > Documentation/admin-guide/sysctl/vm.rst | 16 +++
> > Documentation/filesystems/proc.rst | 28 +++++
> > include/asm-generic/codetag.lds.h | 14 +++
> > include/asm-generic/vmlinux.lds.h | 3 +
> > include/linux/alloc_tag.h | 133 ++++++++++++++++++++
> > include/linux/sched.h | 24 ++++
> > lib/Kconfig.debug | 25 ++++
> > lib/Makefile | 2 +
> > lib/alloc_tag.c | 158 ++++++++++++++++++++++++
> > scripts/module.lds.S | 7 ++
> > 10 files changed, 410 insertions(+)
> > create mode 100644 include/asm-generic/codetag.lds.h
> > create mode 100644 include/linux/alloc_tag.h
> > create mode 100644 lib/alloc_tag.c
> >
> > diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
> > index c59889de122b..a214719492ea 100644
> > --- a/Documentation/admin-guide/sysctl/vm.rst
> > +++ b/Documentation/admin-guide/sysctl/vm.rst
> > @@ -43,6 +43,7 @@ Currently, these files are in /proc/sys/vm:
> > - legacy_va_layout
> > - lowmem_reserve_ratio
> > - max_map_count
> > +- mem_profiling (only if CONFIG_MEM_ALLOC_PROFILING=y)
> > - memory_failure_early_kill
> > - memory_failure_recovery
> > - min_free_kbytes
> > @@ -425,6 +426,21 @@ e.g., up to one or two maps per allocation.
> > The default value is 65530.
> >
> >
> > +mem_profiling
> > +==============
> > +
> > +Enable memory profiling (when CONFIG_MEM_ALLOC_PROFILING=y)
> > +
> > +1: Enable memory profiling.
> > +
> > +0: Disabld memory profiling.
>
> Disable
Ack.
>
> ...
>
> > +allocinfo
> > +~~~~~~~
> > +
> > +Provides information about memory allocations at all locations in the code
> > +base. Each allocation in the code is identified by its source file, line
> > +number, module and the function calling the allocation. The number of bytes
> > +allocated at each location is reported.
>
> See, it even says "number of bytes" :)
Yes, we are changing the output to bytes.
>
> > +
> > +Example output.
> > +
> > +::
> > +
> > + > cat /proc/allocinfo
> > +
> > + 153MiB mm/slub.c:1826 module:slub func:alloc_slab_page
>
> Is "module" meant in the usual kernel module sense? In that case IIRC is
> more common to annotate things e.g. [xfs] in case it's really a module, and
> nothing if it's built it, such as slub. Is that "slub" simply derived from
> "mm/slub.c"? Then it's just redundant?
Sounds good. The new example would look like this:
> sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567
func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod]
func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Note that [ctagmod] is the only allocation from a module in this example.
>
> > + 6.08MiB mm/slab_common.c:950 module:slab_common func:_kmalloc_order
> > + 5.09MiB mm/memcontrol.c:2814 module:memcontrol func:alloc_slab_obj_exts
> > + 4.54MiB mm/page_alloc.c:5777 module:page_alloc func:alloc_pages_exact
> > + 1.32MiB include/asm-generic/pgalloc.h:63 module:pgtable func:__pte_alloc_one
> > + 1.16MiB fs/xfs/xfs_log_priv.h:700 module:xfs func:xlog_kvmalloc
> > + 1.00MiB mm/swap_cgroup.c:48 module:swap_cgroup func:swap_cgroup_prepare
> > + 734KiB fs/xfs/kmem.c:20 module:xfs func:kmem_alloc
> > + 640KiB kernel/rcu/tree.c:3184 module:tree func:fill_page_cache_func
> > + 640KiB drivers/char/virtio_console.c:452 module:virtio_console func:alloc_buf
> > + ...
> > +
> > +
> > meminfo
>
> ...
>
> > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > index 0be2d00c3696..78d258ca508f 100644
> > --- a/lib/Kconfig.debug
> > +++ b/lib/Kconfig.debug
> > @@ -972,6 +972,31 @@ config CODE_TAGGING
> > bool
> > select KALLSYMS
> >
> > +config MEM_ALLOC_PROFILING
> > + bool "Enable memory allocation profiling"
> > + default n
> > + depends on PROC_FS
> > + depends on !DEBUG_FORCE_WEAK_PER_CPU
> > + select CODE_TAGGING
> > + help
> > + Track allocation source code and record total allocation size
> > + initiated at that code location. The mechanism can be used to track
> > + memory leaks with a low performance and memory impact.
> > +
> > +config MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
> > + bool "Enable memory allocation profiling by default"
> > + default y
>
> I'd go with default n as that I'd select for a general distro.
Well, we have MEM_ALLOC_PROFILING=n by default, so if it was switched
on manually, that is a strong sign that the user wants it enabled IMO.
So, enabling this switch by default seems logical to me. If a distro
wants to have the feature compiled in but disabled by default then
this is perfectly doable, just need to set both options appropriately.
Does my logic make sense?
>
> > + depends on MEM_ALLOC_PROFILING
> > +
> > +config MEM_ALLOC_PROFILING_DEBUG
> > + bool "Memory allocation profiler debugging"
> > + default n
> > + depends on MEM_ALLOC_PROFILING
> > + select MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
> > + help
> > + Adds warnings with helpful error messages for memory allocation
> > + profiling.
> > +
>
