Re: [PATCH v3] depmod: Handle installing modules under a prefix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 15, 2023 at 12:10 AM Michal Suchánek <msuchanek@xxxxxxx> wrote:
>
> On Fri, Jul 14, 2023 at 04:54:49PM +0200, Nicolas Schier wrote:
> > On Fri, Jul 14, 2023 at 04:30:02PM +0200, Michal Such�nek wrote:
> > > Hello,
> > >
> > > On Fri, Jul 14, 2023 at 04:05:10PM +0200, Nicolas Schier wrote:
> > > > On Fri, Jul 14, 2023 at 02:21:08PM +0200 Michal Suchanek wrote:
> > > > > Some distributions aim at not shipping any files in / outside of usr.
> > > >
> > > > For me, preventing negation often makes things easier, e.g.: "... aim at
> > > > shipping files only below /usr".
> > > >
> > > > >
> > > > > The path under which kernel modules are installed is hardcoded to /lib
> > > > > which conflicts with this goal.
> > > > >
> > > > > When kmod provides the config command, use it to determine the correct
> > > > > module installation prefix.
> > > > >
> > > > > This is a prefix under which the modules are searched by kmod on the
> > > > > system, and is separate from the temporary staging location already
> > > > > supported by INSTALL_MOD_PATH.
> > > > >
> > > > > With kmod that does not provide the config command empty prefix is used
> > > > > as before.
> > > > >
> > > > > Signed-off-by: Michal Suchanek <msuchanek@xxxxxxx>
> > > > > ---
> > > > > v2: Avoid error on systems with kmod that does not support config
> > > > > command
> > > > > v3: More verbose commit message
> > > > > ---
> > > > >  Makefile          | 4 +++-
> > > > >  scripts/depmod.sh | 8 ++++----
> > > > >  2 files changed, 7 insertions(+), 5 deletions(-)
> > > > >
> > > > > diff --git a/Makefile b/Makefile
> > > > > index 47690c28456a..b1fea135bdec 100644
> > > > > --- a/Makefile
> > > > > +++ b/Makefile
> > > > > @@ -1165,7 +1165,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
> > > > >  # makefile but the argument can be passed to make if needed.
> > > > >  #
> > > > >
> > > > > -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
> > > > > +export KERNEL_MODULE_PREFIX := $(shell kmod config &> /dev/null && kmod config | jq -r .module_prefix)
> > > >
> > > > All other calls of `jq` that I could find are located at tools/; as this here
> > > > is evaluated on each invocation, this should probably be documented in
> > > > Documentation/process/changes.rst?
> > > >
> > > > (Absence of `jq` will cause error messages, even with CONFIG_MODULES=n.)
> > >
> > > That's a good point.
> > >
> > > >
> > > > > +
> > > > > +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_PREFIX)/lib/modules/$(KERNELRELEASE)
> > > > >  export MODLIB
> > > > >
> > > > >  PHONY += prepare0
> > > > > diff --git a/scripts/depmod.sh b/scripts/depmod.sh
> > > > > index 3643b4f896ed..88ac79056153 100755
> > > > > --- a/scripts/depmod.sh
> > > > > +++ b/scripts/depmod.sh
> > > > > @@ -27,16 +27,16 @@ fi
> > > > >  # numbers, so we cheat with a symlink here
> > > > >  depmod_hack_needed=true
> > > > >  tmp_dir=$(mktemp -d ${TMPDIR:-/tmp}/depmod.XXXXXX)
> > > > > -mkdir -p "$tmp_dir/lib/modules/$KERNELRELEASE"
> > > > > +mkdir -p "$tmp_dir$KERNEL_MODULE_PREFIX/lib/modules/$KERNELRELEASE"
> > > > >  if "$DEPMOD" -b "$tmp_dir" $KERNELRELEASE 2>/dev/null; then
> > > > > -       if test -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep" -o \
> > > > > -               -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep.bin"; then
> > > > > +       if test -e "$tmp_dir$KERNEL_MODULE_PREFIX/lib/modules/$KERNELRELEASE/modules.dep" -o \
> > > > > +               -e "$tmp_dir$KERNEL_MODULE_PREFIX/lib/modules/$KERNELRELEASE/modules.dep.bin"; then
> > > > >                 depmod_hack_needed=false
> > > > >         fi
> > > > >  fi
> > > >
> > > > I'd like to come back to the statement from Masahiro: Is the check above,
> > > > against some very old versions of depmod [1], the only reason for this patch?
> > > >
> > > > If we could remove that, would
> > > >
> > > >     make INSTALL_MOD_PATH="$(kmod config | jq -r .module_prefix)" modules_install
> > > >
> > > > be sufficient?
> > >
> > > No, the INSTALL_MOD_PATH is passed as the -b argument to depmod while
> > > the newly added part is not because it's integral part of where the
> > > modules are installed on the system, and not the staging area path.
> >
> > Ah, thanks.  So just for my understanding, could this be a (non-gentle)
> > alternative version of your patch, w/o modifying top-level Makefile?
> >
> > diff --git a/scripts/depmod.sh b/scripts/depmod.sh
> > index 3643b4f896ed..72c819de0669 100755
> > --- a/scripts/depmod.sh
> > +++ b/scripts/depmod.sh
> > @@ -1,4 +1,4 @@
> > -#!/bin/sh
> > +#!/bin/bash
> >  # SPDX-License-Identifier: GPL-2.0
> >  #
> >  # A depmod wrapper used by the toplevel Makefile
> > @@ -23,6 +23,8 @@ if [ -z $(command -v $DEPMOD) ]; then
> >         exit 0
> >  fi
> >
> > +kmod_version=$(( $(kmod --version | sed -rne 's/^kmod version ([0-9]+).*$/\1/p') ))
> > +
> >  # older versions of depmod require the version string to start with three
> >  # numbers, so we cheat with a symlink here
> >  depmod_hack_needed=true
> > @@ -35,6 +37,13 @@ if "$DEPMOD" -b "$tmp_dir" $KERNELRELEASE 2>/dev/null; then
> >         fi
> >  fi
> >  rm -rf "$tmp_dir"
> > +
> > +if [ "${kmod_version}" -gt 32 ]; then
> > +       kmod_prefix="$(kmod config | jq -r .module_prefix)"
> > +       INSTALL_MOD_PATH="${INSTALL_MOD_PATH#${kmod_prefix}"
> > +       depmod_hack_needed=false
> > +fi
> > +
> >  if $depmod_hack_needed; then
> >         symlink="$INSTALL_MOD_PATH/lib/modules/99.98.$KERNELRELEASE"
> >         ln -s "$KERNELRELEASE" "$symlink"
> >
> > (untested, and assuming that kmod module prefix is in kmod >= 32)
>
> It can be detected by running the 'kmod config' command first and
> ignoring the output when it fails which the above patch already did.
> The version check does not sound very reliable.
>
> > Or are I am still missing something?
>
> MODLIB still needs to include the extra prefix so that files are
> installed in the correct location. And that's defined in the toplevel
> Makefile.
>
> Thanks
>
> Michal



As Documentation/kbuild/kbuild.rst mentions,
you can override MODLIB.

Kbuild already provides the maximum flexibility.


$ make modules_install \
  INSTALL_MOD_PATH=/path/to/whatever/staging/dir \
  MODLIB=/path/to/whatever/real/install/destination



-- 
Best Regards
Masahiro Yamada




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux