On Wed, Jan 18, 2023 at 12:47:28PM -0800, Song Liu wrote:
> From: Miroslav Benes <mbenes@xxxxxxx>
>
> Josh reported a bug:
>
> When the object to be patched is a module, and that module is
> rmmod'ed and reloaded, it fails to load with:
>
> module: x86/modules: Skipping invalid relocation target, existing value is nonzero for type 2, loc 00000000ba0302e9, val ffffffffa03e293c
> livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
> livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
>
> The livepatch module has a relocation which references a symbol
> in the _previous_ loading of nfsd. When apply_relocate_add()
> tries to replace the old relocation with a new one, it sees that
> the previous one is nonzero and it errors out.
Should we add a selftest to make sure this problem doesn't come back?
> On ppc64le, we have a similar issue:
>
> module_64: livepatch_nfsd: Expected nop after call, got e8410018 at e_show+0x60/0x548 [livepatch_nfsd]
> livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
> livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
Just to clarify my previous comment, the reference to the powerpc issue
should be removed because it'll be fixed in a separate patch.
> He also proposed three different solutions. We could remove the error
> check in apply_relocate_add() introduced by commit eda9cec4c9a1
> ("x86/module: Detect and skip invalid relocations"). However the check
> is useful for detecting corrupted modules.
>
> We could also deny the patched modules to be removed. If it proved to be
> a major drawback for users, we could still implement a different
> approach. The solution would also complicate the existing code a lot.
>
> We thus decided to reverse the relocation patching (clear all relocation
> targets on x86_64). The solution is not
> universal and is too much arch-specific, but it may prove to be simpler
> in the end.
>
> Signed-off-by: Miroslav Benes <mbenes@xxxxxxx>
> Signed-off-by: Song Liu <song@xxxxxxxxxx>
> Acked-by: Miroslav Benes <mbenes@xxxxxxx>
> Co-developed-by: Song Liu <song@xxxxxxxxxx>
> Reported-by: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
According to submitting-patches.rst the Co-developed-by is supposed to
be immediately before your Signed-off-by.
Also, other than the commit log, this patch is almost completely
unrecognizable compared to Miroslav's original patch. Does it still
make sense for him to be listed as the author?
In the -tip tree they sometimes use an Originally-by tag, which might be
relevant here.
> -static int __apply_relocate_add(Elf64_Shdr *sechdrs,
> +static int __write_relocate_add(Elf64_Shdr *sechdrs,
> const char *strtab,
> unsigned int symindex,
> unsigned int relsec,
> struct module *me,
> - void *(*write)(void *dest, const void *src, size_t len))
> + void *(*write)(void *dest, const void *src, size_t len),
> + bool apply)
> {
> unsigned int i;
> Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
> Elf64_Sym *sym;
> void *loc;
> u64 val;
> + u64 zero = 0ULL;
>
> - DEBUGP("Applying relocate section %u to %u\n",
> + DEBUGP("%s relocate section %u to %u\n",
> + (apply) ? "Applying" : "Clearing",
"(apply)" has unnecessary parentheses.
> relsec, sechdrs[relsec].sh_info);
> for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
> + int write_size = 4;
We already know we're writing, I suggest just calling it 'size' to be
more consistent with kernel style.
Also, it can be an unsigned value like size_t.
Also, instead of initializing it here with a potentially bogus value
which may need to be overwritten for a 64-bit reloc, it's better to
explicitly set the size in each individual case below. That's makes the
logic clearer and helps prevent future bugs if new 64-bit relocation
types are added later.
> case R_X86_64_PC32:
> case R_X86_64_PLT32:
> - if (*(u32 *)loc != 0)
> - goto invalid_relocation;
> val -= (u64)loc;
> - write(loc, &val, 4);
> #if 0
> - if ((s64)val != *(s32 *)loc)
> + if ((s64)val != *(s32 *)&val)
> goto overflow;
> #endif
Why is the compiled-out code getting changed? Is it actually fixing a
hypothetical bug?
This code really needs to be removed anyway, it's been dead for at least
15 years.
> break;
> case R_X86_64_PC64:
> - if (*(u64 *)loc != 0)
> - goto invalid_relocation;
> val -= (u64)loc;
> - write(loc, &val, 8);
> + write_size = 8;
> break;
> default:
> pr_err("%s: Unknown rela relocation: %llu\n",
> me->name, ELF64_R_TYPE(rel[i].r_info));
> return -ENOEXEC;
> }
> +
> + if (apply) {
> + if (memcmp(loc, &zero, write_size)) {
> + pr_err("x86/modules: Skipping invalid relocation target, existing value is nonzero for type %d, loc %p, val %Lx\n",
It's not just "skipping", it's erroring out completely. Yes, it's is a
pre-existing error message but we might as well improve it while
touching it.
Maybe just remove the "Skipping", i.e. change "Skipping invalid ..." to
"Invalid ..." ?
> + (int)ELF64_R_TYPE(rel[i].r_info), loc, val);
> + return -ENOEXEC;
> + }
> + write(loc, &val, write_size);
> + } else {
> + if (memcmp(loc, &val, write_size)) {
> + pr_warn("x86/modules: Clearing invalid relocation target, existing value does not match expected value for type %d, loc %p, val %Lx\n",
> + (int)ELF64_R_TYPE(rel[i].r_info), loc, val);
> + }
> + write(loc, &zero, write_size);
If the value doesn't match then something has gone badly wrong. Why go
ahead with the clearing in that case?
> +#ifdef CONFIG_LIVEPATCH
> +
> +void clear_relocate_add(Elf64_Shdr *sechdrs,
> + const char *strtab,
> + unsigned int symindex,
> + unsigned int relsec,
> + struct module *me)
> +{
> + write_relocate_add(sechdrs, strtab, symindex, relsec, me, false);
> +}
> +#endif
Superflous newline after the '#ifdef CONFIG_LIVEPATCH'.
> +
> #endif
>
> int module_finalize(const Elf_Ehdr *hdr,
> diff --git a/include/linux/moduleloader.h b/include/linux/moduleloader.h
> index 7b4587a19189..0b54ec9856df 100644
> --- a/include/linux/moduleloader.h
> +++ b/include/linux/moduleloader.h
> @@ -75,6 +75,13 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
> unsigned int symindex,
> unsigned int relsec,
> struct module *mod);
> +#ifdef CONFIG_LIVEPATCH
This could use a comment explaining the purpose of this function:
/*
* Some architectures (namely x86_64 and ppc64) perform sanity checks when
* applying relocations. If a patched module gets unloaded and then later
* reloaded (and re-patched), klp re-applies relocations to the replacement
* function(s). Any leftover relocations from the previous loading of the
* patched module might trigger the sanity checks.
*
* To prevent that, when unloading a patched module, clear out any relocations
* that might trigger arch-specific sanity checks on a future module reload.
*/
> +void clear_relocate_add(Elf_Shdr *sechdrs,
> + const char *strtab,
> + unsigned int symindex,
> + unsigned int relsec,
> + struct module *me);
> +#endif
--
Josh
