Re: [PATCH v9 02/10] rockchip-mailbox: Fix typo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 27, 2022 at 11:42:36AM -0600, Allen Webb wrote:
> On Tue, Dec 20, 2022 at 5:09 PM Luis Chamberlain <mcgrof@xxxxxxxxxx> wrote:
> > I think it would make sense then to be explicit about this for now, even
> > if it seems we can obsolete this. Right now the justification for having
> > this for built-in is *very* specific to this feature for USB, which
> > makes use of special USB sysfs attributes which as you explained, allows
> > to restrict probe of devices even though the respective driver is already
> > loaded.
> 
> The thing we might obsolete is limiting it to just the USB subsystem.
> I am fine with expanding the documentation and limiting the scope of
> the feature to USB/thunderbolt for now.

Great let's do that as otherwise it can leave a few folks scratchign
their head.

> > > There are sysfs attributes called  authorized and authorized_default
> > > that together can prevent devices from being fully enumerated and
> > > probed.
> >
> > Although these attributes are USB specfic today it gets me wondering if
> > other subsystems may benefit from a similar feature.
> 
> The subsystems that would likely benefit the most are ones that are
> externally reachable. 

Makes sense.

> The external ports that come to mind are USB /
> thunderbolt, firewire, PCMCIA / expresscard, eSATA, serial and
> parallel ports. Supporting PCMCIA / expresscard seems like it would
> require adding the authorized sysfs attribute to pci. eSATA would be
> covered by ata.

Makes sense, I'd personally ignore anything legacy such as PCMCIA though.

> > > authorized_default gets set to 0 for the hub and any devices
> > > connected after that will show in sysfs, but not fully enumerate or
> > > probe until the device's authorized attribute is set to 1. There are
> > > some edge cases like internal devices which have some extra
> > > complexity.
> > >
> > > As for documentation, I wasn't able to find much other than:
> > > https://github.com/torvalds/linux/blob/v6.1/drivers/usb/core/hcd.c#L370
> > > /* authorized_default behaviour:
> > > * -1 is authorized for all devices except wireless (old behaviour)
> > > * 0 is unauthorized for all devices
> > > * 1 is authorized for all devices
> > > * 2 is authorized for internal devices
> > > */
> > > ...
> > > and
> > > https://github.com/torvalds/linux/blob/v6.1/Documentation/admin-guide/kernel-parameters.txt#L6424
> > > usbcore.authorized_default=
> > >    [USB] Default USB device authorization:
> > >    (default -1 = authorized except for wireless USB,
> > >    0 = not authorized, 1 = authorized, 2 = authorized
> > >    if device connected to internal port)
> > > ...
> > > The feature looks like it was originally introduced for wireless USB in:
> > > https://www.mail-archive.com/linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx/msg54289.html
> > > and later adapted for use cases like USBGuard here:
> > > https://github.com/torvalds/linux/commit/c4fc2342cb611f945fa468e742759e25984005ad
> >
> > Thanks for digging all this up. Can you extend the docs on
> > Documentation/driver-api/usb/ somewhere about this attribute as part of
> > your changes so its clear the motivation, *then* you make your changes.
> > The documentation for MODULE_DEVICE_TABLE() can just say:
> >
> > The only use-case for built-in drivers today is enable userspace to
> > prevent / allow probe for devices on certain subsystems even if the
> > driver is already loaded. An example is the USB subsystem with its
> > authorized_default sysfs attribute. For more details refer to the
> > kernel's Documentation for USB about authorized_default.
> >
> > That should be clear enough for both USB driver writers and others.
> >
> > Please also extend the docs for MODULE_DEVICE_TABLE() on
> > Documentation/driver-api/usb/writing_usb_driver.rst or where you see
> > fit for your changes. That can go into depth about the USBGuard stuff.
> >
> >   Luis
> 
> How do you feel about only having one version of the macro for both
> cases and merging the documentation so things are kept simple? Here is
> what I have locally for the macro without the ifdef and the updated
> documentation:
> 
> /*
>  * Creates an alias so file2alias.c can find device table.
>  *
>  * Use this in cases where a device table is used to match devices because it
>  * surfaces match-id based module aliases to userspace for:
>  *   - Automatic module loading through modules.alias.
>  *   - Tools like USBGuard which allow or block devices based on policy such as
                                 ^ allow to

>  *     which modules match a device.
>  *
>  * The only use-case for built-in drivers today is enable userspace to prevent /

                                                ^ is to

>  * allow probe for devices on certain subsystems even if the driver is already
>  * loaded. An example is the USB subsystem with its authorized_default sysfs
>  * attribute. For more details refer to the kernel's Documentation for USB about
>  * authorized_default.
>  *
>  * The module name is included in the alias for two reasons:
>  *   - It avoids creating two aliases with the same name for built-in modules.
>  *     Historically MODULE_DEVICE_TABLE was a no-op for built-in modules, so
>  *     there was nothing to stop different modules from having the same device
>  *     table name and consequently the same alias when building as a module.
>  *   - The module name is needed by files2alias.c to associate a particular
>  *     device table with its associated module for built-in modules since
>  *     files2alias would otherwise see the module name as `vmlinuz.o`.

Yeah sure this reads much better.

>  */
> #define MODULE_DEVICE_TABLE(type, name) \
> extern void *CONCATENATE( \
> CONCATENATE(__mod_##type##__##name##__, \
> __KBUILD_MODNAME), \
> _device_table) \
> __attribute__ ((unused, alias(__stringify(name))))
> 
> 
> Here is a draft version for an updated to
> Documentation/driver-api/usb/ (I will add the 80 char line breaks
> later) in case you have feedback:
> 
> 
> # Authorization
> 
> Authorization provides userspace a way to allow or block configuring
> devices early during enumeration before any modules are probed for the
> device. While it is possible to block a device by not loading the
> required modules, this also prevents other devices from using the
> module as well. For example someone might have an unattended computer
> downloading installation media to a USB drive. Presumably this
> computer would be locked to make it more difficult for a bad actor to
> access the computer. Since USB storage devices are not needed to
> interact with the lock screen, the authorized_default sysfs attribute
> can be set to not authorize new USB devices by default. A userspace
> tool like USBGuard can then vet the devices. Mice, keyboards, etc can
> be allowed by writing to their authorized sysfs attribute so that the
> lock screen can still be used (this important in cases like
> suspend+resume or docks) while other devices can be blocked as long as
> the lock screen is shown.
> 
> ## Sysfs Attributes
> 
> Userspace can control USB device authorization through the
> authorized_default and authorized sysfs attributes.
> 
> ### authorized_default
> 
> .. kernel-doc:: drivers/usb/core/hcd.c
>    :export:
> 
> The authorized_default sysfs attribute is only present for host
> controllers. It determines the initial state of the authorized sysfs
> attribute of USB devices newly connected to the corresponding host
> controller. It can take on the following values:
> 
> +---------------------------------------------------+
> | Value | Behavior                                  |
> +=======+===========================================+
> |    -1 | Authorize all devices except wireless USB |
> +-------+-------------------------------------------+
> |     0 | Do not authorize new devices              |
> +-------+-------------------------------------------+
> |     1 | Authorize new devices                     |
> +-------+-------------------------------------------+
> |     2 | Authorize new internal devices only       |
> +---------------------------------------------------+
> 
> Note that firmware platform code determines if a device is internal or
> not and this is reported as the connect_type sysfs attribute of the
> USB port. This is currently supported by ACPI, but device tree still
> needs an implementation. Authorizing new internal devices only can be
> useful to work around issues with devices that misbehave if there are
> delays in probing their module.
> 
> ### authorized
> 
> .. kernel-doc:: drivers/usb/core/sysfs.c
>    :export:
> 
> Every USB device has an authorized sysfs attribute which can take the
> values 0 and 1. When authorized is 0, the device still is present in
> sysfs, but none of its interfaces can be associated with drivers and
> modules will not be probed. When authorized is 1 (or set to one) a
> configuration is chosen for the device and its interfaces are
> registered allowing drivers to bind to them.

Good stuff!

  Luis



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux