When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created
for each module. Also, objtool is postponed until LLVM bitcode is
converted to ELF.
CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until
objects are merged together.
This commit stops generating *.prelink.o, so the build flow will look
the same with/without LTO.
The following figures show how the LTO build currently works, and
how this commit is changing it.
Current build flow
==================
[1] single-object module
$(LD)
$(CC) +objtool $(LD)
foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko
(LLVM bitcode) (ELF) |
|
foo.mod.o --/
[2] multi-object module
$(LD)
$(CC) $(AR) +objtool $(LD)
foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko
| (archive) (ELF) |
foo2.c -----> foo2.o --/ |
(LLVM bitcode) foo.mod.o --/
One confusion is foo.o in multi-object module is an archive despite of
its suffix.
New build flow
==============
[1] single-object module
Since there is only one object, we do not need to have the LLVM
bitcode stage. Use $(CC)+$(LD) to generate an ELF object in one
build rule. When LTO is disabled, $(LD) is unneeded because $(CC)
produces an ELF object.
$(CC)+$(LD)+objtool $(LD)
foo.c ------------------------> foo.o -------> foo.ko
(ELF) |
|
foo.mod.o --/
[2] multi-object module
Previously, $(AR) was used to combine LLVM bitcode into an archive,
but there was no technical reason to do so.
This commit just uses $(LD) to combine and convert them into a single
ELF object.
$(LD)
$(CC) +objtool $(LD)
foo1.c -------> foo1.o -------> foo.o -------> foo.ko
| (ELF) |
foo2.c -------> foo2.o ---/ |
(LLVM bitcode) foo.mod.o --/
Signed-off-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
Reviewed-by: Nicolas Schier <nicolas@xxxxxxxxx>
Tested-by: Nathan Chancellor <nathan@xxxxxxxxxx>
---
(no changes since v2)
Changes in v2:
- replace the chain of $(if ...) with $(and )
scripts/Kbuild.include | 4 +++
scripts/Makefile.build | 58 ++++++++++++---------------------------
scripts/Makefile.lib | 7 -----
scripts/Makefile.modfinal | 5 ++--
scripts/Makefile.modpost | 9 ++----
scripts/mod/modpost.c | 7 -----
6 files changed, 25 insertions(+), 65 deletions(-)
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 3514c2149e9d..455a0a6ce12d 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -15,6 +15,10 @@ pound := \#
# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
dot-target = $(dir $@).$(notdir $@)
+###
+# Name of target with a '.tmp_' as filename prefix. foo/bar.o => foo/.tmp_bar.o
+tmp-target = $(dir $@).tmp_$(notdir $@)
+
###
# The temporary file to save gcc -MMD generated dependencies must not
# contain a comma
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 461998a2ad2b..838ea5e83174 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -88,10 +88,6 @@ endif
targets-for-modules := $(foreach x, o mod $(if $(CONFIG_TRIM_UNUSED_KSYMS), usyms), \
$(patsubst %.o, %.$x, $(filter %.o, $(obj-m))))
-ifneq ($(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT),)
-targets-for-modules += $(patsubst %.o, %.prelink.o, $(filter %.o, $(obj-m)))
-endif
-
ifdef need-modorder
targets-for-modules += $(obj)/modules.order
endif
@@ -152,8 +148,16 @@ $(obj)/%.ll: $(src)/%.c FORCE
# The C file is compiled and updated dependency information is generated.
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
+is-single-obj-m = $(and $(part-of-module),$(filter $@, $(obj-m)),y)
+
+ifdef CONFIG_LTO_CLANG
+cmd_ld_single_m = $(if $(is-single-obj-m), ; $(LD) $(ld_flags) -r -o $(tmp-target) $@; mv $(tmp-target) $@)
+endif
+
quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
- cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< $(cmd_objtool)
+ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< \
+ $(cmd_ld_single_m) \
+ $(cmd_objtool)
ifdef CONFIG_MODVERSIONS
# When module versioning is enabled the following steps are executed:
@@ -224,21 +228,16 @@ cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(o
endif # CONFIG_STACK_VALIDATION
-ifneq ($(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT),)
-
-# Skip objtool for LLVM bitcode
-$(obj)/%.o: objtool-enabled :=
-
-else
# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
-$(obj)/%.o: objtool-enabled = $(if $(filter-out y%, \
- $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y)
+is-standard-object = $(if $(filter-out y%, $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y)
-endif
+delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT))
+
+$(obj)/%.o: objtool-enabled = $(if $(is-standard-object),$(if $(delay-objtool),$(is-single-obj-m),y))
ifdef CONFIG_TRIM_UNUSED_KSYMS
cmd_gen_ksymdeps = \
@@ -267,24 +266,6 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
$(call if_changed_rule,cc_o_c)
$(call cmd,force_checksrc)
-ifneq ($(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT),)
-# Module .o files may contain LLVM bitcode, compile them into native code
-# before ELF processing
-quiet_cmd_cc_prelink_modules = LD [M] $@
- cmd_cc_prelink_modules = \
- $(LD) $(ld_flags) -r -o $@ \
- --whole-archive $(filter-out FORCE,$^) \
- $(cmd_objtool)
-
-# objtool was skipped for LLVM bitcode, run it now that we have compiled
-# modules into native code
-$(obj)/%.prelink.o: objtool-enabled = y
-$(obj)/%.prelink.o: part-of-module := y
-
-$(obj)/%.prelink.o: $(obj)/%.o FORCE
- $(call if_changed,cc_prelink_modules)
-endif
-
cmd_mod = echo $(addprefix $(obj)/, $(call real-search, $*.o, .o, -objs -y -m)) | \
$(AWK) -v RS='( |\n)' '!x[$$0]++' > $@
@@ -294,7 +275,7 @@ $(obj)/%.mod: FORCE
# List module undefined symbols
cmd_undefined_syms = $(NM) $< | sed -n 's/^ *U //p' > $@
-$(obj)/%.usyms: $(obj)/%$(mod-prelink-ext).o FORCE
+$(obj)/%.usyms: $(obj)/%.o FORCE
$(call if_changed,undefined_syms)
quiet_cmd_cc_lst_c = MKLST $@
@@ -416,16 +397,11 @@ $(obj)/modules.order: $(obj-m) FORCE
$(obj)/lib.a: $(lib-y) FORCE
$(call if_changed,ar)
-ifneq ($(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT),)
-quiet_cmd_link_multi-m = AR [M] $@
-cmd_link_multi-m = \
- rm -f $@; \
- $(AR) cDPrsT $@ @$(patsubst %.o,%.mod,$@)
-else
quiet_cmd_link_multi-m = LD [M] $@
- cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ @$(patsubst %.o,%.mod,$@)
-endif
+ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ @$(patsubst %.o,%.mod,$@) $(cmd_objtool)
+$(multi-obj-m): objtool-enabled := $(delay-objtool)
+$(multi-obj-m): part-of-module := y
$(multi-obj-m): %.o: %.mod FORCE
$(call if_changed,link_multi-m)
$(call multi_depend, $(multi-obj-m), .o, -objs -y -m)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 0453a1904646..f75138385449 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -225,13 +225,6 @@ dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \
$(addprefix -I,$(DTC_INCLUDE)) \
-undef -D__DTS__
-ifneq ($(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT),)
-# With CONFIG_LTO_CLANG, .o files in modules might be LLVM bitcode, so we
-# need to run LTO to compile them into native code (.lto.o) before further
-# processing.
-mod-prelink-ext := .prelink
-endif
-
# Useful for describing the dependency of composite objects
# Usage:
# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 7f39599e9fae..35100e981f4a 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -9,7 +9,7 @@ __modfinal:
include include/config/auto.conf
include $(srctree)/scripts/Kbuild.include
-# for c_flags and mod-prelink-ext
+# for c_flags
include $(srctree)/scripts/Makefile.lib
# find all modules listed in modules.order
@@ -54,9 +54,8 @@ if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check), \
$(cmd); \
printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
-
# Re-generate module BTFs if either module's .ko or vmlinux changed
-$(modules): %.ko: %$(mod-prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(modules): %.ko: %.o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(call if_changed_except,ld_ko_o,vmlinux)
ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+$(if $(newer-prereqs),$(call cmd,btf_ko))
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 48585c4d04ad..f2ce411acd59 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -41,9 +41,6 @@ __modpost:
include include/config/auto.conf
include $(srctree)/scripts/Kbuild.include
-# for mod-prelink-ext
-include $(srctree)/scripts/Makefile.lib
-
MODPOST = scripts/mod/modpost \
$(if $(CONFIG_MODVERSIONS),-m) \
$(if $(CONFIG_MODULE_SRCVERSION_ALL),-a) \
@@ -118,8 +115,6 @@ $(input-symdump):
@echo >&2 ' Modules may not have dependencies or modversions.'
@echo >&2 ' You may get many unresolved symbol warnings.'
-modules := $(sort $(shell cat $(MODORDER)))
-
# KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined symbols
ifneq ($(KBUILD_MODPOST_WARN)$(filter-out $(existing-input-symdump), $(input-symdump)),)
MODPOST += -w
@@ -128,9 +123,9 @@ endif
# Read out modules.order to pass in modpost.
# Otherwise, allmodconfig would fail with "Argument list too long".
quiet_cmd_modpost = MODPOST $@
- cmd_modpost = sed 's/\.ko$$/$(mod-prelink-ext)\.o/' $< | $(MODPOST) -T -
+ cmd_modpost = sed 's/ko$$/o/' $< | $(MODPOST) -T -
-$(output-symdump): $(MODORDER) $(input-symdump) $(modules:.ko=$(mod-prelink-ext).o) FORCE
+$(output-symdump): $(MODORDER) $(input-symdump) FORCE
$(call if_changed,modpost)
targets += $(output-symdump)
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index b46653d46e3d..018527d96680 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -716,10 +716,6 @@ static char *remove_dot(char *s)
size_t m = strspn(s + n + 1, "0123456789");
if (m && (s[n + m] == '.' || s[n + m] == 0))
s[n] = 0;
-
- /* strip trailing .prelink */
- if (strends(s, ".prelink"))
- s[strlen(s) - 8] = '\0';
}
return s;
}
@@ -839,9 +835,6 @@ static void read_symbols(const char *modname)
/* strip trailing .o */
tmp = NOFAIL(strdup(modname));
tmp[strlen(tmp) - 2] = '\0';
- /* strip trailing .prelink */
- if (strends(tmp, ".prelink"))
- tmp[strlen(tmp) - 8] = '\0';
mod = new_module(tmp);
free(tmp);
}
--
2.32.0
