Hi Janne,
On Thu, Feb 20, 2025 at 5:32 AM Janne Grunau <j@xxxxxxxxxx> wrote:
>
> Hej,
>
> On Fri, Oct 18, 2024 at 06:53:32PM +0800, Victor Shih wrote:
> > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >
> > Changes are:
> > * Disable GL9755 overcurrent interrupt when power on/off on UHS-II.
> > * Enable the internal clock when do reset on UHS-II mode.
> > * Increase timeout value before detecting UHS-II interface.
> > * Add vendor settings fro UHS-II mode.
> > * Remove sdhci_gli_enable_internal_clock functon unused clk_ctrl variable.
> > * Make a function sdhci_gli_wait_software_reset_done() for gl9755 reset.
> > * Remove unnecessary code from sdhci_gl9755_reset().
> >
> > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Lucas Lai <lucas.lai@xxxxxxxxxxxxxxxxxxx>
> > ---
> >
> > drivers/mmc/host/sdhci-pci-gli.c | 235 ++++++++++++++++++++++++++++++-
> > 1 file changed, 234 insertions(+), 1 deletion(-)
>
> This change results in error messages / timeout about UHS2 followed by
> register dumps with the GL9755 integrated in Apple silicon Macbook Pros
> and Mac Studio systems. Non UHS-II function of controller does not seem
> to be affected. Apple advertises the the SDXC slot as UHS-II capable.
>
> The only quirk we've experienced with gl9755 on this platform is that 8
> and 16 bit MMIO reads do not work. Workaround added in commit
> c064bb5c78c1b ("mmc: sdhci-pci-gli: GL975[50]: Issue 8/16-bit MMIO reads
> as 32-bit reads.").
>
> If you have ideas or patches to try I'm happy to do that. If not we can
> look into what MacOS does.
>
> See kernel log and lspci output below
>
> Thanks,
> Janne
>
> [ 38.130033] kernel: sdhci: Secure Digital Host Controller Interface driver
> [ 38.130141] kernel: sdhci: Copyright(c) Pierre Ossman
> [ 38.133352] kernel: sdhci-pci 0000:02:00.0: Adding to iommu group 13
> [ 38.160551] kernel: sdhci-pci 0000:02:00.0: SDHCI controller found [17a0:9755] (rev 1)
> [ 38.160655] kernel: sdhci-pci 0000:02:00.0: enabling device (0000 -> 0002)
> [ 38.160750] kernel: mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA 64-bit
> [ 38.274617] kernel: mmc0: not detect UHS2 interface in 100ms.
> [ 38.274717] kernel: mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 38.274782] kernel: mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000005
> [ 38.277391] kernel: mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
> [ 38.277475] kernel: mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
> [ 38.280125] kernel: mmc0: sdhci: Present: 0x20070000 | Host ctl: 0x00000000
> [ 38.280206] kernel: mmc0: sdhci: Power: 0x000000bf | Blk gap: 0x00000000
> [ 38.284511] kernel: mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000032f
> [ 38.284592] kernel: mmc0: sdhci: Timeout: 0x00000007 | Int stat: 0x00000000
> [ 38.284636] kernel: mmc0: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
> [ 38.287200] kernel: mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
> [ 38.287281] kernel: mmc0: sdhci: Caps: 0x396a3281 | Caps_1: 0x1803057f
> [ 38.291212] kernel: mmc0: sdhci: Cmd: 0x00000000 | Max curr: 0x000000c8
> [ 38.291292] kernel: mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
> [ 38.291335] kernel: mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> [ 38.293513] kernel: mmc0: sdhci: Host ctl2: 0x00009107
> [ 38.293604] kernel: mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
> [ 38.297842] kernel: mmc0: sdhci_uhs2: ==================== UHS2 ==================
> [ 38.297923] kernel: mmc0: sdhci_uhs2: Blk Size: 0x00000000 | Blk Cnt: 0x00000000
> [ 38.297968] kernel: mmc0: sdhci_uhs2: Cmd: 0x00000000 | Trn mode: 0x00000000
> [ 38.300773] kernel: mmc0: sdhci_uhs2: Int Stat: 0x00000000 | Dev Sel : 0x00000000
> [ 38.300853] kernel: mmc0: sdhci_uhs2: Dev Int Code: 0x00000000
> [ 38.304739] kernel: mmc0: sdhci_uhs2: Reset: 0x00000000 | Timer: 0x000000a7
> [ 38.304811] kernel: mmc0: sdhci_uhs2: ErrInt: 0x00000000 | ErrIntEn: 0x00030000
> [ 38.304856] kernel: mmc0: sdhci_uhs2: ErrSigEn: 0x00030000
> [ 38.307110] kernel: mmc0: sdhci: ============================================
> [ 38.307201] kernel: mmc0: cannot detect UHS2 interface.
> [ 38.310110] kernel: mmc0: failed to initial phy for UHS-II!
> [ 38.424645] kernel: mmc0: not detect UHS2 interface in 100ms.
> [ 38.424731] kernel: mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 38.424758] kernel: mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000005
> [ 38.424782] kernel: mmc0: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
> [ 38.424840] kernel: mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
> [ 38.427603] kernel: mmc0: sdhci: Present: 0x20070000 | Host ctl: 0x00000000
> [ 38.427659] kernel: mmc0: sdhci: Power: 0x000000bf | Blk gap: 0x00000000
> [ 38.430579] kernel: mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x0000032f
> [ 38.430626] kernel: mmc0: sdhci: Timeout: 0x00000007 | Int stat: 0x00000000
> [ 38.433504] kernel: mmc0: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
> [ 38.433550] kernel: mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
> [ 38.437596] kernel: mmc0: sdhci: Caps: 0x396a3281 | Caps_1: 0x1803057f
> [ 38.437641] kernel: mmc0: sdhci: Cmd: 0x00000000 | Max curr: 0x000000c8
> [ 38.437677] kernel: mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
> [ 38.440318] kernel: mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> [ 38.440345] kernel: mmc0: sdhci: Host ctl2: 0x00009107
> [ 38.444119] kernel: mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
> [ 38.444161] kernel: mmc0: sdhci_uhs2: ==================== UHS2 ==================
> [ 38.444184] kernel: mmc0: sdhci_uhs2: Blk Size: 0x00000000 | Blk Cnt: 0x00000000
> [ 38.446918] kernel: mmc0: sdhci_uhs2: Cmd: 0x00000000 | Trn mode: 0x00000000
> [ 38.446958] kernel: mmc0: sdhci_uhs2: Int Stat: 0x00000000 | Dev Sel : 0x00000000
> [ 38.450833] kernel: mmc0: sdhci_uhs2: Dev Int Code: 0x00000000
> [ 38.450874] kernel: mmc0: sdhci_uhs2: Reset: 0x00000000 | Timer: 0x000000a7
> [ 38.450907] kernel: mmc0: sdhci_uhs2: ErrInt: 0x00000000 | ErrIntEn: 0x00030000
> [ 38.454625] kernel: mmc0: sdhci_uhs2: ErrSigEn: 0x00030000
> [ 38.454665] kernel: mmc0: sdhci: ============================================
> [ 38.454699] kernel: mmc0: cannot detect UHS2 interface.
> [ 38.456705] kernel: mmc0: failed to initial phy for UHS-II!
>
On which UHS-II card does this message appear? Please share the card
information.
If it is a UHS-I card, this message is normal.
Best regards,
Ben Chuang
>
> `lspci -vvvnn -d 17a0:9755` output:
> 02:00.0 SD Host controller [0805]: Genesys Logic, Inc GL9755 SD Host Controller [17a0:9755] (rev 01) (prog-if 01)
> Subsystem: Genesys Logic, Inc GL9755 SD Host Controller [17a0:9755]
> Device tree node: /sys/firmware/devicetree/base/soc@200000000/pcie@590000000/pci@1,0/mmc@0,0
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 168
> IOMMU group: 13
> Region 0: Memory at 5c1e00000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W TEE-IO-
> DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
> LnkCap: Port #85, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 unlimited
> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
> LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1
> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
> 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix-
> EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
> FRS- TPHComp- ExtTPHComp-
> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> AtomicOpsCtl: ReqEn-
> IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
> 10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
> LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
> EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
> Retimer- 2Retimers- CrosslinkRes: unsupported
> Capabilities: [e0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000fffff000 Data: 0018
> Capabilities: [f8] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [100 v1] Vendor Specific Information: ID=17a0 Rev=1 Len=008 <?>
> Capabilities: [108 v1] Latency Tolerance Reporting
> Max snoop latency: 0ns
> Max no snoop latency: 0ns
> Capabilities: [110 v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
> PortCommonModeRestoreTime=255us PortTPowerOnTime=3100us
> L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
> T_CommonMode=0us LTR1.2_Threshold=3375104ns
> L1SubCtl2: T_PwrOn=3100us
> Capabilities: [200 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
> ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
> PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
> ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
> PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
> ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
> PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout+ AdvNonFatalErr+ CorrIntErr- HeaderOF-
> AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> Kernel driver in use: sdhci-pci
> Kernel modules: sdhci_pci
>
