This commit adds missing documentation for the "writeprotect user get"
command to both the man page (mmc.1) and the documentation page
(docs/HOWTO.rst).
The "writeprotect user get" command prints the user areas write protect
configuration for the specified device.
Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
docs/HOWTO.rst | 3 +++
mmc.1 | 3 +++
2 files changed, 6 insertions(+)
diff --git a/docs/HOWTO.rst b/docs/HOWTO.rst
index 095a9bd..3902fa4 100644
--- a/docs/HOWTO.rst
+++ b/docs/HOWTO.rst
@@ -28,6 +28,9 @@ Running mmc-utils
If <number> is passed (0 or 1), only protect that particular eMMC boot partition, otherwise protect both. It will be write-protected until the next boot.
-p Protect partition permanently instead. NOTE! -p is a one-time programmable (unreversible) change.
+ ``writeprotect user get <device>``
+ Print the user areas write protect configuration for <device>.
+
``writeprotect user set <type> <start block> <blocks> <device>``
Set user area write protection.
diff --git a/mmc.1 b/mmc.1
index 543742c..7e94557 100644
--- a/mmc.1
+++ b/mmc.1
@@ -27,6 +27,9 @@ If \fInumber\fR is passed (0 or 1), only protect that specified eMMC boot partit
.br
It will be write-protected until the next boot.
.TP
+.B writeprotect user get <device>
+Print the user areas write protect configuration for <device>.
+.TP
.BI writeprotect " " user " " set " " \fItype\fR " " \fIstart\-block\fR " " \fIblocks\fR " " \fIdevice\fR
Set the write protect configuration for the specified region of the user area for the device.
.br
--
2.25.1
