Add validation of ts,data-gpios array size during probe. The driver later hard-codes 8 as the size of the array when using it, so we should be validating that the array is actually that big to prevent possible out of bounds accesses. Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> --- drivers/bus/ts-nbus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c index 2328c48b9b1260e805c631f2aa7379d620084537..d3ee102a13893c83c50e41f7298821f4d7ae3487 100644 --- a/drivers/bus/ts-nbus.c +++ b/drivers/bus/ts-nbus.c @@ -48,6 +48,10 @@ static int ts_nbus_init_pdata(struct platform_device *pdev, return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data), "failed to retrieve ts,data-gpio from dts\n"); + if (ts_nbus->data->ndescs != 8) + return dev_err_probe(&pdev->dev, -EINVAL, + "invalid number of ts,data-gpios\n"); + ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH); if (IS_ERR(ts_nbus->csn)) return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn), -- 2.43.0