For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
[ 1.914038][ T82] mmc0: mmc_select_hs400es failed, error -84
[ 1.914954][ T82] mmc0: error -84 whilst initialising MMC card
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support")
Signed-off-by: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
---
Changes in v2:
- Change commit title from 'optimize' to 'Fix'
- Add a Fixes tag
- Change spaces back to tabs
---
drivers/mmc/host/mtk-sd.c | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 4b6e91372526..345ea91629e0 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -273,6 +273,7 @@
#define MSDC_PAD_TUNE_CMD2_SEL BIT(21) /* RW */
#define PAD_DS_TUNE_DLY_SEL BIT(0) /* RW */
+#define PAD_DS_TUNE_DLY2_SEL BIT(1) /* RW */
#define PAD_DS_TUNE_DLY1 GENMASK(6, 2) /* RW */
#define PAD_DS_TUNE_DLY2 GENMASK(11, 7) /* RW */
#define PAD_DS_TUNE_DLY3 GENMASK(16, 12) /* RW */
@@ -318,6 +319,7 @@
/* EMMC50_PAD_DS_TUNE mask */
#define PAD_DS_DLY_SEL BIT(16) /* RW */
+#define PAD_DS_DLY2_SEL BIT(15) /* RW */
#define PAD_DS_DLY1 GENMASK(14, 10) /* RW */
#define PAD_DS_DLY3 GENMASK(4, 0) /* RW */
@@ -2504,13 +2506,23 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct msdc_host *host = mmc_priv(mmc);
+
host->hs400_mode = true;
- if (host->top_base)
- writel(host->hs400_ds_delay,
- host->top_base + EMMC50_PAD_DS_TUNE);
- else
- writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ if (host->top_base) {
+ if (host->hs400_ds_dly3)
+ sdr_set_field(host->top_base + EMMC50_PAD_DS_TUNE,
+ PAD_DS_DLY3, host->hs400_ds_dly3);
+ if (host->hs400_ds_delay)
+ writel(host->hs400_ds_delay,
+ host->top_base + EMMC50_PAD_DS_TUNE);
+ } else {
+ if (host->hs400_ds_dly3)
+ sdr_set_field(host->base + PAD_DS_TUNE,
+ PAD_DS_TUNE_DLY3, host->hs400_ds_dly3);
+ if (host->hs400_ds_delay)
+ writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ }
/* hs400 mode must set it to 0 */
sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
/* to improve read performance, set outstanding to 2 */
@@ -2530,14 +2542,11 @@ static int msdc_execute_hs400_tuning(struct mmc_host *mmc, struct mmc_card *card
if (host->top_base) {
sdr_set_bits(host->top_base + EMMC50_PAD_DS_TUNE,
PAD_DS_DLY_SEL);
- if (host->hs400_ds_dly3)
- sdr_set_field(host->top_base + EMMC50_PAD_DS_TUNE,
- PAD_DS_DLY3, host->hs400_ds_dly3);
+ sdr_clr_bits(host->top_base + EMMC50_PAD_DS_TUNE,
+ PAD_DS_DLY2_SEL);
} else {
sdr_set_bits(host->base + PAD_DS_TUNE, PAD_DS_TUNE_DLY_SEL);
- if (host->hs400_ds_dly3)
- sdr_set_field(host->base + PAD_DS_TUNE,
- PAD_DS_TUNE_DLY3, host->hs400_ds_dly3);
+ sdr_clr_bits(host->base + PAD_DS_TUNE, PAD_DS_TUNE_DLY2_SEL);
}
host->hs400_tuning = true;
--
2.46.0
