Convert atmel,hsmci documentation to yaml format. The new file will inherit from mmc-controller.yaml. Signed-off-by: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx> --- .../devicetree/bindings/mmc/atmel,hsmci.yaml | 124 +++++++++++++++++++++ .../devicetree/bindings/mmc/atmel-hsmci.txt | 73 ------------ 2 files changed, 124 insertions(+), 73 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/atmel,hsmci.yaml b/Documentation/devicetree/bindings/mmc/atmel,hsmci.yaml new file mode 100644 index 000000000000..3870d464faa8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/atmel,hsmci.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/atmel,hsmci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel High-Speed MultiMedia Card Interface (HSMCI) + +description: + The Atmel HSMCI controller provides an interface for MMC, SD, and SDIO memory + cards. + +maintainers: + - Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> + - Aubin Constans <aubin.constans@xxxxxxxxxxxxx> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + const: atmel,hsmci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rxtx + + clocks: + maxItems: 1 + + clock-names: + const: mci_clk + + "#address-cells": + const: 1 + description: Used for slot IDs. + + "#size-cells": + const: 0 + +patternProperties: + "^slot@[0-9]+$": + type: object + description: A slot node representing an MMC, SD, or SDIO slot. + + allOf: + - $ref: mmc-controller.yaml + + properties: + reg: + description: Slot ID. + minimum: 0 + + bus-width: + description: Number of data lines connected to the controller. + enum: [1, 4, 8] + + cd-gpios: + description: GPIO used for card detection. + + cd-inverted: + type: boolean + description: Inverts the value of the card detection GPIO. + + wp-gpios: + description: GPIO used for write protection. + + required: + - reg + - bus-width + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + +anyOf: + - required: + - slot@0 + - required: + - slot@1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/at91.h> + mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + #address-cells = <1>; + #size-cells = <0>; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + cd-inverted; + }; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt deleted file mode 100644 index 07ad02075a93..000000000000 --- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Atmel High Speed MultiMedia Card Interface - -This controller on atmel products provides an interface for MMC, SD and SDIO -types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the atmel-mci driver. - -1) MCI node - -Required properties: -- compatible: should be "atmel,hsmci" -- #address-cells: should be one. The cell is the slot id. -- #size-cells: should be zero. -- at least one slot node -- clock-names: tuple listing input clock names. - Required elements: "mci_clk" -- clocks: phandles to input clocks. - -The node contains child nodes for each slot that the platform uses - -Example MCI node: - -mmc0: mmc@f0008000 { - compatible = "atmel,hsmci"; - reg = <0xf0008000 0x600>; - interrupts = <12 4>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "mci_clk"; - clocks = <&mci0_clk>; - - [ child node definitions...] -}; - -2) slot nodes - -Required properties: -- reg: should contain the slot id. -- bus-width: number of data lines connected to the controller - -Optional properties: -- cd-gpios: specify GPIOs for card detection -- cd-inverted: invert the value of external card detect gpio line -- wp-gpios: specify GPIOs for write protection - -Example slot node: - -slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 15 0> - cd-inverted; -}; - -Example full MCI node: -mmc0: mmc@f0008000 { - compatible = "atmel,hsmci"; - reg = <0xf0008000 0x600>; - interrupts = <12 4>; - #address-cells = <1>; - #size-cells = <0>; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 15 0> - cd-inverted; - }; - slot@1 { - reg = <1>; - bus-width = <4>; - }; -}; --- base-commit: feffde684ac29a3b7aec82d2df850fbdbdee55e4 change-id: 20241205-hsmci-7ac3ea915777 Best regards, -- Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
