Re: [PATCH] dt-bindings: mmc: marvell,xenon-sdhci: Simplify Armada 3700 if/then schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 13 Nov 2024 at 23:56, Rob Herring (Arm) <robh@xxxxxxxxxx> wrote:
>
> Properties are supposed to be defined in the top-level schema and then
> disallowed in an if/then schema if necessary. Move the "marvell,pad-type"
> property to follow this.
>
> "reg" can also be similarly described at the top-level with only the
> number of entries restricted in the if/then schema.
>
> Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  .../bindings/mmc/marvell,xenon-sdhci.yaml     | 48 +++++++++----------
>  1 file changed, 22 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> index cfe6237716f4..3f48d8292d5b 100644
> --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> @@ -38,15 +38,9 @@ properties:
>
>    reg:
>      minItems: 1
> -    maxItems: 2
> -    description: |
> -      For "marvell,armada-3700-sdhci", two register areas.  The first one
> -      for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
> -      Voltage Control register.  Please follow the examples with compatible
> -      "marvell,armada-3700-sdhci" in below.
> -      Please also check property marvell,pad-type in below.
> -
> -      For other compatible strings, one register area for Xenon IP.
> +    items:
> +      - description: Xenon IP registers
> +      - description: Armada 3700 SoC PHY PAD Voltage Control register
>
>    clocks:
>      minItems: 1
> @@ -61,6 +55,17 @@ properties:
>    interrupts:
>      maxItems: 1
>
> +  marvell,pad-type:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum:
> +      - sd
> +      - fixed-1-8v
> +    description:
> +      Type of Armada 3700 SoC PHY PAD Voltage Controller register. If "sd" is
> +      selected, SoC PHY PAD is set as 3.3V at the beginning and is switched to
> +      1.8V when later in higher speed mode. If "fixed-1-8v" is selected, SoC PHY
> +      PAD is fixed 1.8V, such as for eMMC.
> +
>    marvell,xenon-sdhc-id:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      minimum: 0
> @@ -147,27 +152,18 @@ allOf:
>      then:
>        properties:
>          reg:
> -          items:
> -            - description: Xenon IP registers
> -            - description: Armada 3700 SoC PHY PAD Voltage Control register
> -
> -        marvell,pad-type:
> -          $ref: /schemas/types.yaml#/definitions/string
> -          enum:
> -            - sd
> -            - fixed-1-8v
> -          description: |
> -            Type of Armada 3700 SoC PHY PAD Voltage Controller register.
> -            If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
> -            and is switched to 1.8V when later in higher speed mode.
> -            If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
> -            eMMC.
> -            Please follow the examples with compatible
> -            "marvell,armada-3700-sdhci" in below.
> +          minItems: 2
>
>        required:
>          - marvell,pad-type
>
> +    else:
> +      properties:
> +        reg:
> +          maxItems: 1
> +
> +        marvell,pad-type: false
> +
>    - if:
>        properties:
>          compatible:
> --
> 2.45.2
>




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux