The current process flow does not handle MMC requests that are indicated to ignore the command response CRC. For instance, cmd12 and cmd48 from mmc_cqe_recovery() are marked to ignore CRC, but they are not matched to the appropriate response type in msdc_cmd_find_resp(). As a result, they are defaulted to 'MMC_RSP_NONE', which means no response is expected. This commit applies the flag 'MMC_RSP_R1B_NO_CRC' to fix the response type setting in msdc_cmd_find_resp() and adds the logic to ignore CRC in msdc_cmd_done(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Signed-off-by: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx> --- drivers/mmc/host/mtk-sd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index efb0d2d5716b..e2c385853eef 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -1097,11 +1097,12 @@ static inline u32 msdc_cmd_find_resp(struct msdc_host *host, u32 resp; switch (mmc_resp_type(cmd)) { - /* Actually, R1, R5, R6, R7 are the same */ + /* Actually, R1, R5, R6, R7 are the same */ case MMC_RSP_R1: resp = 0x1; break; case MMC_RSP_R1B: + case MMC_RSP_R1B_NO_CRC: resp = 0x7; break; case MMC_RSP_R2: @@ -1351,7 +1352,8 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, * CRC error. */ msdc_reset_hw(host); - if (events & MSDC_INT_RSPCRCERR) { + if (events & MSDC_INT_RSPCRCERR && + mmc_resp_type(cmd) != MMC_RSP_R1B_NO_CRC) { cmd->error = -EILSEQ; host->error |= REQ_CMD_EIO; } else if (events & MSDC_INT_CMDTMO) { -- 2.46.0