Hello Ben, hello Uffe,
thank you for this fix.
Am 25.10.24 um 15:22 schrieb Ulf Hansson:
> + Georg
>
> On Fri, 25 Oct 2024 at 08:01, Ben Chuang <benchuanggli@xxxxxxxxx> wrote:
>>
>> From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
>>
>> On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only
>> after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz().
>> So the low power negotiation mode cannot be enabled again.
>> Introduce gl9767_set_low_power_negotiation() function to fix it.
>>
>> The explanation process is as below.
>>
>> static void sdhci_gl9767_set_clock()
>> {
>> ...
>> gl9767_vhs_write();
>> ...
>> value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
>> pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a)
>>
>> gl9767_disable_ssc_pll(); <--- (b)
>> sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
>>
>> if (clock == 0)
>> return; <-- (I)
>>
>> ...
>> if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
>> ...
>> gl9767_set_ssc_pll_205mhz(); <--- (c)
>> }
>> ...
>> value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
>> pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II)
>> gl9767_vhs_read();
>> }
>>
>> (a) disable low power negotiation mode. When return on (I), the low power
>> mode is disabled. After (b) and (c), VHS is read-only, the low power mode
>> cannot be enabled on (II).
>>
>> Fixes: d2754355512e ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767")
>
> Is this the same problem as being reported in
> https://lore.kernel.org/all/41c1c88a-b2c9-4c05-863a-467785027f49@xxxxxxxxxxxxxxxxxxx/
>
> ?
Yes, this patch fixes
https://bugzilla.kernel.org/show_bug.cgi?id=219284
This makes my patch obsolete.
Kind regards,
Georg
